Orange County CAF's: up to no good

Anyone have hte rear shock part number? Is it 25001-121 and 25001-119-EXT?

 

Most likely, yes.

Ya check your invoice and double check to see the spring rating. I thought mine were 600# but my invoice says 650#

 

You're not welcome!

I can on King shocks and coilovers, but I can't order the components. So I can't get the coil springs alone from King,Fox,Icon or Eibach and it sucks.
It's even a nightmare to try and order the cool stuff like 12" for shock relocations and such. My company is geared towards the guy that has a zillion chrome dingle berries on their car vs the actual enthusiast. BUT we're getting better

 

KING - #25001-119 Tacoma 05+ (6 lug) Front 2.5 Remote Reservoir Coilover

KING - #25001-121 Tacoma 05+ (6 lug) Rear 2.5 Remote Reservoir Shock

That is what i have.

 

haha thats awesome. Good looking out tho.

 

@ItsRichieRich @socalktk

 

You guys are awesome. If I don't end up riding Sunday morning, I am down to meet up for some lunch and buy you guys a beer.

 

I remember helping you go deeper into that hole. Should have brought a rope, haha!

2.5 is plenty, as said extended vs standard on those Kings are in internal shim that keeps the shaft from fully extending. I have done almost 300 Tacoma lifts to date and most go with 2.5 up front and 2.0 in the rear, some go with the 2.5 in rear but not as many.
Also get the adjustable, you will thank me later.
Also if you need help picking out what you need I have dabbled in the off-road Toyota truck platform a little bit and Im in Vista. Let me know if you have questions, or need CMC or work, advice, etc..

I've seen them done together, creates issues at full droop, no bueno.

Stock ones? Or 2.5 stuff? I may have 3rd gen stockers laying around..

Its called a "Shim", but its actually a piece of tubing or a drilled billet piece, and LT is the equivalent of having a gambling problem or getting hooked on Meth!

 

yup same shit i got. guess ill order the 700# spring from bajakits lol

Also need to bash in my pinch welds more. @downhillbik3r whens our date? haha

 

Ya shim. That was the word I was looking for haha

 

Awesome, you're right down the street from my work (Escondido).

 

Take an angle grinder and notch it and then BFH. Makes life easier.

 

Well I was lurking and I thought I knew what I wanted for suspension.. But damn this was some great info guys!

 

BFH - bash fucking hard? Bitch from hell?

 

Spacer can also work just fine too, lol.

I have 4" hydro bumps on my rig and had to make some shims to turn them into 3", just used some DOM tubing.

 

Tell me more...

 

Anytime

 

Big Fucking Hammer

 

Its no big deal, first hit is free!

 

@MadTaco461 messed me up bad man. He showed me the light, I never should have looked into the light!