Fitting 33's stock ride height

"Fittings 33's stock" is a video on YouTube, and I believe these are the wheels he used to fit 285x75x16's. (P/N PT758-35170-02.) I cannot seem to find these in matte black, or verify the -13mm offset mentioned in the video. If anyone has a solution to either issue, or thoughts would be much appreciated!

 

Welcome to the forum. Take some time and look around. Lots of good information to be found. Those are stock wheels from the TRD pro and they are gloss black. They are not available in matte you would have to have them powder coated if you want them matte or any other color.

 

A 255x85x16 is also 33" and on OE wheels much less likely to rub.

Wider is not always better.

 

Thanks

 

There is no way that's a -13 offset. You can tell it's not even close to that in the picture.

Definitely positive offset which is less likely to rub.

 

If it's this video then yes they are the wheels but they are not available in matte black. Specs are 16x7, +13mm offset and 4.5bs.
https://www.youtube.com/watch?v=t2a86AtYFOg

 

I'll let you know soon if they really fit without rubbing or not...I have the same wheels on order along with 285/75/16 S/T Maxx's - stock suspension/no lift.

They are a +13 offset and supposedly do not rub according to that video and a couple people on Instagram I've found.

 

I too am curious as to how those will fit, as I am looking into that same wheel. If they do fit that would be awesome, or I was also looking into the Toyo Open Country MT in 255/85R16 on that same wheel. The only thing that has me really concerned is that the Toyo MT is 33.5" tall. Not really worried about the width, as that should not be an issue.

 

+13(not minus) sounds much more likely.

 

I'm looking at running these with 255/85r16 ST Maxx tires.

Here is a good post to read but it's a 2nd gen not a 3rd like yours.

Edit- proper link added

 

Cool thanks. I will check it out