SOLD. Custom bed rack, CVT Mt. Hood RTT, Sceptre MFC, and Maxtrax package.

Sold!


Custom, one off, DCSB bed rack for sale. I would like to sell it all as a package deal. I am changing my tent arrangement and going to a high clearance bumper with swing out.

This heavy duty bed rack mounts at all four corners of the bed floor through the use of the factory bed mounting points and bolts. The rack also attaches to the bed rails (a feature that is probably a little overkill). There is an over the fender tool box with key on the passenger side (could use a seal around the lid). The tool box is integrated into the rack but can be left out if desired.

The rack has a solid swing-out with spare tire mount and CBI jerry can mount. There are two lock open positions for the swing arm.

I paid $1000 early last year for the rack. A good value considering the tire and fuel storage, tent rack, and tool box combined.

There not the best but I fabricated some brackets to hold Maxtrax recovery boards using Maxtrax’s mounting hardware.

I am including eight Ballistic Fabrication Trick Tabs https://www.ballisticfabrication.com/collections/brackets-tabs/products/trick-tab

That I had intended to use for attaching the tent. The CVT brackets work fine, but this would be an improvement.

I am throwing in a black Scepter MFC and spout along with two replacement seals and hose for spout. $110 value.

Also included in the price are the Maxtrax (used once this winter on a stuck car) and the Maxtrax mounting hardware. $339 value.

The CVT tent is an older model Mt. Hood. The Mt. Hood is a 3+ person tent that measures 72”x96”x50” open.

I believe I have only slept in the tent a total of 14 days since my purchase at CVT in Bend about four years ago.

The tent itself is in great condition as well as the mattress. The cover has some scratches from tree limbs but none are all the way through. Covers can be purchased through CVT.

This tent also has the vestibule that attaches under the folded out floor. This vestibule was only attached once. An operator error led to a small couple inch tear where it attaches to the tent.

The whole setup is very solid, works great, and allows one to use the larger tent on the short bed without the awkward appearance of overhang (The spare and fuel can fill that void).

I no longer need such a big tent (single now) and have discovered a need for a high clearance bumper (damage).

I am looking to get $2400 for the whole set up. Cash or Paypal only.

I will provide more photos on request.

I am willing to deliver (with a non-refundable deposit of $500. Deposit will count toward the total purchase price) as far as Portland, Bend, Boise, Seattle, Wenatchee, Spokane, Sandpoint and areas of similar distances. Shorter distances can be negotiated. Due to my work schedule, it may be a two to three weeks to deliver.






On a different rack showing vestibule: