What have you done to your Tacoma today? 1st Gen Edition

That's awesome. Would be a waste of time for me. Ha ha. Admire your dedication though

 

Thanks! They haven't said anything about it but I'm not gonna skip out on it. Rather be 100% on that leg again, don't know how much ya take for granted when you can't move properly

 

For sure man. I ended up just building a computer for entertainment.

 

Umm, can I go a week or so with my battery light flickering on and off??
Took it in to The shop I always use, alternator is bad or failed the 'test'. But it passed at AutoZone.
Looking at cleaning all connections to and from the alternator, maybe that's causing the light flickering

 

Debadged the back half in prep for sanding, which is in prep for monstaline

 

would like to see how this turns out, thinking of doing monstaliner for truck bed

 

Hopefully it turns out good... just gotta take my time... which is hard for me ha

 

Probably, but you may have issues starting it at times. I would check your grounds first and clean everything else up.

 

Just finished replacing my rear brakes, backing plates, axle seals and bearings.I did the lines a couple of years ago
Then I tackled the job I was dreading the most, the rear diff pinion seal....it was a snap!
Pretty soon I'll have a whole new truck....

 

I just dont really have the need or pocket for 35s. And I dont want half my floorboard taken up by tubbing. I'm 6'5" so I need as much floor as I can get

I'm going to here it from the girlfriend but I was planning on getting some trail gear sliders and making one more cross member in the sliders so it has 4 instead of 3.

 

Well I was going to change my front break pads and rotors today BUT the caliper bolts won't budge. So instead I hit them with penetrating oil and grabbed a beer. Looks like I have a project for another day.

 

Picked up tailgate straps, and fixed my squeaky window. Maybe some bumper fab

 

Yeah mine would have locked in for sure. I Thought i had slipping problems in Wa two years back, but i didn't notice it this last trip. So not sure really. haha Have to monitor it more. But yes, hasn't been on very much. I've had it since The Epic though..I think...so it has quite a few hard miles on it. I got it the summer i worked in AK.

 

Tubbing shouldn't take out half your floorboard. Technically it would only be an extra inch, as that's the difference in radius between a 33 and 35. I am 6'4", so I feel the pain, but I didn't notice much of a difference in foot room after tubbing.

I'm just saying if you're gonna go to all that trouble, you might as well take out the extra little bit.

 

I've been catching up on some tv and some xbox since I can't work on the truck or order parts since I'm not working, can't really afford any so I've stayed off here for the past week

 

I just finished Westworld, worth the watch. Lots of great views of Canyonlands National Park, near Moab.

 

that is the best show on the internet i think. Extremely well done.

 

There should be a small hole in the bottom of the mirror and a Phillips head screw should be in there holding the glass in the mirror.

 

Really? Swore I saw someone's build and it looked like most of the clutch side was gone

 

https://www.tacomaworld.com/threads...anister-and-rubber-mats.503763/#post-15727405