muffler offset question???

i am going to order a muffler and i believe i need 2.5 inch inlet and outlet. But i dont know if both ends need to be centered or one side offset or what can anyone help me out???

 

bump

 

have you looked under the truck to figure out how it is now?

oh and be a little more patient then 9 minutes to do a bump people have other things going on other than tw

 

If you want to use original plumbing, you'll need to look & measure what you currently have (sorry, my 08 is a 2TR) & look specs on what you want to get to match plumbing.. If you don't mind a shop cutting & fitting some pipe, get what you want..

An offset is supposed to be a bit quieter than a straight-through.. Longer/bigger body gives deeper tone.

 

what colors your truck? we got the same thing! 2tr ac 08

 

there is actually a lot of play in the exhaust system. the best fit is probably center in and offset out (or the other way around), but you can get away with center, center, or offset, offset as well. keep in mind that you will need about a foot or extra pipe (give or take) to clamp or weld in because the aftermarket mufflers are usually shorter than stock.