Before and after sizing and pix

Here's some #s for guys trying to budget build with Bilstein 5100's.

17 sr5 4wd dcsb

Started with 265/75/16 Toyo at2 on sr5 wheels and added 1.25" spacers for a better width. Suspension Bilstein 5100's front pt#f4-be5-c477-t1 set at 2nd from the top with stock sr5 coils. Rear using 0-1" Bilstein 5100's and 1" block with u bolts. No armor no winch, tow pkg 4wd with full tank of gas each time.

Measuring from bottom of the fender lip to ground placing tape through the hub.

FR 36.75"
FL 36.25"
RR 38"
RL 36.75"

Added the front taco lean spacer on front left driver corner from wheelers.
Added front bumper, winch, sliders, ifs skid plate, rear high clearance bumper. All steel. Custom made by @jeffz0rz of JTA Metalworks and @Shmellmopwho sliders.

Fronts came down .50" rear came down .25" after addition of armor and bumpers.

After switching to Method Standard 17x8.5 0 offset and cooper discover at3 285/70/17 no rubbing yet! No more spacers same suspension and armor

FR 37.50"
FL 37.50"
RR 38"
RL 37.5"

Pictures in order

I'll post update pix on Thursday going to do OME 2886 coils on front c clip set at 0. Still no UCA's or brake lines, yet

Enjoy!!!

 

Sick

 

I know this thread is old but the front Bilsteins you have listed here are for a 2nd Gen truck. Did they work on this application or did you just not put the right part number down? Reason I’m curious is because I just bought some from a guy that told me they came off a 16 but when I checked the part number they show to be for 05-15. Damn that dude. I have a 20 and thought I was getting a deal.

 

Not into the bumpers, but it's your truck.

Congrats!

 

The white ones not mine. Lol

the original post was from 2017