LED Exhaust Tip Install

Did a little something to trick out my exhaust system, Don't really see this on here all that much.

APC Red LED Exhaust Tip eBay special Shipped $18.99.


It won't fit over the factory tailpipe.


I measured and drilled a 1/4" hole and used the APC mounting hole and bolt.


I was worried it was going to stick out to far, but I think it works.


Ok, no judging here. I used a trailer wiring plug for an easy hook up. I'll wrap it in some tape and clean it up.


It's really bright, unlike the installer

 

Does it also make a cool whistling sound?

 

I hope this was done for laughs.

 

The Tacos go Wooooooooot.
Seriously....paint black over the flames, route the wire correctly ( it around the pipe lol) and wire it to your running lights!!

 

You really should plastidip the pipe so you can't see the wires.

 

..and have this guy set you up with some crazy LED set up.

 

LOL! A for effort

 

When you want dat WOOT WHOOT!

 

Ahhh good ol' bub rub and lil' sis

 

I need to hook up with these guys, Oakland ain't too far from here.

On a sad note, lol, I got no Woot Wooot with this tip

 

You KNOW your cool when you have to find a place to tap into while wiring up your exhaust tip......

 

I'm sorry but I just got some sort of cancer...

 

It's a 3rd gen thing, you wouldn't understand.

 

Regardless of the look you are going for.... That's a fire hazard that's going to happen. You will also short out some circuits once the wires melt long enough.

 

ANNNNNNNNNNDDDDDDDDDD of course this masterpiece hails from a 3rd gen owner... You're pretty much digging your own grave at this point guys

All in good heart though. I just can't believe you would actually drill through your own exhaust to install something that will probably break over time. I mean the wire will probably melt at some point, if they're cheap led's, they'll probably melt at some point also. If I was to ever do this (which I will NEVER do this lol) I would stick with a clamp on.

 

https://youtu.be/JZD-ADArwXo