clutch pedal vibration

So I have a slight vibration in my clutch pedal after already replacing the clutch/pressure plate/throw out bearing/pilot bearing/flywheel. It occurs after the engine is warmed up, while shifting at about 2500 rpm's, and I've been driving it for a little while. I was thinking it could be a motor mount/ transmission mount issue as it could be transferring the vibration through to the clutch. Any ideas/suggestions would help a ton!

 

Remember to tighten the transmission mount bolts up .

Having a Hydraulic clutch you should not get vibration into the clutch pedal linkage.

It very well could just be one of those unrelated things.

Did you change the hydraulics when changing the clutch??

One of the Master cylinder bolts loose??

If anything was loose from the fly wheel out I think you would have a constant vibration more in the drive train then the clutch pedal

 

@Wyoming09 I have literally checked every bolt under that thing and torqued it to the specs. I did not change out the hydraulics but did so fairly recently. I'll try to replace all the mounts once I have the time in the hopes that will solve it.

 

Did you get the flywheel surfaced - flywheels don't always come flat from the factory.