Help with 3 inch lift

I want to install a 3 inch strut spacer, or either bilstein 5100s. What would be easier to do by myself?

 

And I would also get new coils with the 5100s

 

What equipment do you have? A spacer will be easier to do but you still have to take apart quite a few things and get the vehicle aligned

 

Spacer easier for sure.

 

I have a shop. I’ve never done a lift kit before. Was just trying to figure what could be done if I put 1 Saturday away to do it

 

5100s are super easy to install. You could literally have both sides done in 2-3 hours if your handy. Here is a quick and safe way to do the 5100s without using a spring compressor. It's the best way to do it. I've done it on my last 2 tacomas.

Don't mind the disclaimer in the beginning.

 

Thanks for the help. I believe I’m going to for the 5100s

 

If you want to make it really easy you can order the 5100s with springs fully assembled so it's a simple pull and replace.

 

there the best bang for the buck for starting out,im thinking about going with the new 6112 on my new truck maybe,give Marie at Headstrong affroad a call or message on ehre and she can hook you up.