285/70/17 do fit with a 2 inch lift

Hey guys I did alot of reading on Tacomaworld before getting my wheels and tires, but u didn't get any concrete information on tires size for a 2 inch lift most people said you would rub a ton with 285/70/17s others said they wouldn't. So I just wanted to show some pics of them mounted and confirm that 285/70/17 fit on a 17/9 rim with 4.75 backspacing without any issues. I don't even have rubbing. I only took off the airdam that comes on the trd sport.

 

Take it off-road and report back.

 

Flex it out.

 

So from reading the replies, 285/70 rub?

 

From the pics posted most likely especially more on a trail when your flexing or articulating at weird angles. Hell, with 275/70/17s on my OME lift I was rubbing on pavement at full lock in reverse. I had to trim some plastic off the fender

 

They don't rub whatsoever here's pics of them in full turn

 

I've been driving with them for about 2 weeks and have had no rubbing. I also went on a small Trail and had no issues there

Haven't done any extreme off-roading yet tho

 

3gen must be coated with unicorn dust because my 2gen rubbed like a bastard with smaller tires and less offset.

I prefer to turn my tires while off-road so that might be the difference

 

Damn 3rd gens. Glad it's working out for you.

 

I'm guessing these won't fit on stock 17/7.5 wheels?

 

definitely not

 

I'm pretty uninformed when it comes to tire sizes, and I'm having a hard time figuring out what I can mount. Whats the biggest size tire I can mount on my stock rims, if I plan on lifting the truck to accommodate them.

 

Plenty of people run that size tire on a 7.5 wide wheel. You'll be fine.

 

its the backspacing not the width

 

it would rub the control arms as many have tried 285 on stocks

 

Stock control arms and no spacers, yes. The tires will fit on the wheels though.

 

I never rubbed at full lock like many people. I'd always rub at like half lock in reverse on the innermost piece of painted plastic. I think it's part of the fender flair. I'd post a pic but I still haven't learned how after almost 10 years on here

 

I rub a little with 285s on my 4r just like @Fluffymonkey. Only when i reverse out half locked lol

 

just click upload file, browse to file on your pc.. it will upload, click full size on left when its uploaded.

 

Will 285/70/17's w/ 17/9 tire rub on my 2014 taco?. It has a 3" front strut spacer and 2" rear block. If so what will I need to do to resolve the rubbing?