What Have You Done To Your 2nd Gen Tacoma Today?

Finally got this done thanks to @glorifiedwelder clean welds.

 

Thanks, and no, truck just hit 65,000 that's why I did all of that. I change the oil every 5500 or so and 4 quarts of transmission fluid every 3 oil changes. Differentials and transfer case about every 20,000. This is the first time I have done the belt, so I figured I would do the idlers and tensioner at the same time. And the brakes should be good for a while. Nice feel with the stainless lines and DOT 4.

 

Im organizing a group buy for Advanced fiberglass fenders and bedsides! Up to 25% off if we get enough people. Go check it out!

https://www.tacomaworld.com/threads/feeler-advanced-fiberglass-group-buy.511408/

 

MT or AT?

Your tranny must love you. I did My first tranny change 2k ago and plan to do it every oil change for the hell of it. I don't drive many miles so it'll be once /yr.

 

me too, know of any threads that cover said thingy?

 

He probably even washes it !

 

Didn't even know people did this. Is it on the cheap mod list?

 

install oil/vapor seperator....hope Toyota hasn't forgotten anything else, running outa room

 

man i wish i could devote myself to that type of routine
that truck is in good hands

 

I just installed that knob by itself. It looks good with the grommets though.

 

There is another camp that believes it should never be cracked open. I'm in that camp.

 

I agree about AT fluid not being changed unless a lot of towing is done.

I have a manual trans so I do whatever.. I also grease my u joints very often.... lol

 

Every 30k on a manual trans is about the correct interval for changing fluids, same goes for differentials. Which reminds me.... I need to do mine again

 

Auto trans, I don't trust flush machines, there's always something left from the fluid that was in it before, and as far as dipstick service, well obviously we can't do that. I do four quarts every three oil changes, fluid is always in the same nice red color, and transmission shifts and behaves exactly the same as when I bought it.

 

Hmmm plan on doing a write-up?

 

Mounted my 60'' Hi-Lift above my platform today.

 

Is this anything simular to an "oil-catch-can" are they one and the same?.....or are these two entirely different separate functions?

 

Well now that looks like fun rt there.

 

Completed the big three wiring upgrade and added a Northstar grp31 I got forever ago in a group buy. Built the engine harness using a donor as a template.
⚡️

 

My girls 6,000 shy of 400,000 miles today. So I crawled under and gave her a good look over/dry cleaned the under body/engine bits. Dropped some sea foam in the tank. Dry cleaned under the hood and pumped out and replaced the brake and ps fluid for s&g