Largest tire I can fit on 2010?

265/75-16 or 255/85-16 are the largest on stock suspension with zero to minimal rubbing and trimming involved.

On a 3" lift the most popular size would be 285/75-16 which will either require 1.25" wheel spacers or aftermarket wheels with 4.5" of backspacing. This size WILL require cutting and trimming to the fender liner and more than likely the CMC (cab mount chop).


Side note: If you haven't already noticed your thread has received a lot of attention. Your question is the single most commonly asked question with thousands of threads covering the subject.
https://www.google.com/search?q=lar...WAhWmilQKHUG8A1kQrQIINCgEMAA&biw=1383&bih=687

 

But I can't use my fumoto valve with kickouts. Maybe I'll just go arb.

 

With a little trimming and the removal of the passenger side visor it might work.

 

Cool then I use the visor to do my carrier bearing drop.

 

That might work, I used mine as shims for the UCA's to get more Caster

 

Right not now my caster is good but that might change when I swap the top hats on my billies for berets. If my caster goes out should I get Weathertechs or Huskys?

 

Bump