1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Spicer XC Carrier Bearing

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Travis1209, Aug 28, 2017.

  1. Aug 28, 2017 at 1:37 PM
    #1
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    So I recently heard about the "Spicer XC" carrier bearing from @MadTaco461.

    I wanted to see who else knows about this, and how many people have tried it? Seems to be a much more affordable, similar version of the IEDLS bearing. Made of standard rubber, other than polyurethane. My driveshaft vibrations are to a minimum with just the slightest takeoff shudder. About to just order one of these and try it out myself.

    http://drivetrain.estoreseller.com/DanaCatalogs/j300-p9a.pdf

    http://www.jegs.com/i/Spicer/094/21...1431&CATARGETID=230006180039217914&cadevice=c
     
    Last edited: Sep 1, 2017
  2. Aug 28, 2017 at 2:14 PM
    #2
    cj13058

    cj13058 Well-Known Member

    Joined:
    Dec 22, 2015
    Member:
    #172878
    Messages:
    350
    Gender:
    Male
    Oregon
    Vehicle:
    2005 Tacoma TRD Off-Road DCSB
    ARB 3'' lift, ARE canopy, 265/75/16 All Terrain KO2, after market stereo, ECGS differential bushing, ARB Deluxe front Bumper, Warn M8000 winch, custom winch control box install, FrontRunner Slimline canopy rack,
    Although I cannot remember the manufacturer of the part, I used something very similar. It was made for a Ford Bronco II. Been on there for almost two years and still going strong.
     
    Travis1209[OP] likes this.
  3. Sep 1, 2017 at 10:14 AM
    #3
    greenEFSI

    greenEFSI TacoSupreme____

    Joined:
    Jun 29, 2016
    Member:
    #190830
    Messages:
    1,408
    Gender:
    Male
    First Name:
    Gio
    West Covina, SoCal
    Vehicle:
    '15 TRD Pro Super White
    I did some research on this as well and even found @cj13058 picture in another thread very useful, the spicer part number is 211590-1X and it would have to be mounted from the top since the drop is larger than factory
    IMG_0523.jpg
     
    Last edited: Sep 5, 2017
    Travis1209[OP] likes this.
  4. Sep 1, 2017 at 11:06 AM
    #4
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Im going to try to stay away from the stock OEM design, try either the IEDLS, or the one in the OP. A design that wont allow all of the slop for the driveshaft to move around
     
    Last edited: Sep 1, 2017
  5. Sep 1, 2017 at 11:11 AM
    #5
    Unchained 5150

    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,421
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.
    I can't get the second link to work
     
  6. Sep 1, 2017 at 11:13 AM
    #6
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Try now
     
  7. Sep 1, 2017 at 11:15 AM
    #7
    greenEFSI

    greenEFSI TacoSupreme____

    Joined:
    Jun 29, 2016
    Member:
    #190830
    Messages:
    1,408
    Gender:
    Male
    First Name:
    Gio
    West Covina, SoCal
    Vehicle:
    '15 TRD Pro Super White
  8. Sep 1, 2017 at 11:15 AM
    #8
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    4WD
     
  9. Sep 1, 2017 at 11:17 AM
    #9
    greenEFSI

    greenEFSI TacoSupreme____

    Joined:
    Jun 29, 2016
    Member:
    #190830
    Messages:
    1,408
    Gender:
    Male
    First Name:
    Gio
    West Covina, SoCal
    Vehicle:
    '15 TRD Pro Super White
    The ID on that bearing is for the 2wd, dont think it will work for 4wd, but I could be wrong.
     
  10. Sep 1, 2017 at 11:36 AM
    #10
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    https://www.tacomaworld.com/threads...-carrier-bearing.421410/page-66#post-15561768

    It seems to be identical to the IEDLS one.

    I think that the 2wd bearings will work with 4x4. But 4x4 bearings wont work with 2wd. Because of the slip joint "BEHIND" the carrier bearing with 4x4, not in "FRONT" of the bearing with 2wd. So with the 2wd the driveshaft needs to slide back and forth within the carrier bearing. With 4x4, not the case
     
  11. Sep 5, 2017 at 2:41 PM
    #11
    greenEFSI

    greenEFSI TacoSupreme____

    Joined:
    Jun 29, 2016
    Member:
    #190830
    Messages:
    1,408
    Gender:
    Male
    First Name:
    Gio
    West Covina, SoCal
    Vehicle:
    '15 TRD Pro Super White
    @Travis1209 I called a dana/spicer supplier and gave them the part number off the sticker on my driveshaft. The replacement oem bearing is 5002007, which has the same id as the IEDLS and Jegs link you posted. Just wanted to correct myself, since I did have some wrong info!
     
    Unchained 5150 likes this.
  12. Sep 5, 2017 at 2:51 PM
    #12
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Right on, thanks for the update
     
  13. Sep 22, 2017 at 1:31 PM
    #13
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    20170922_131155.jpg
    Got the bearing in today. Tomorrow, the install. Will update. Biggest concern will be how to situate the driveline angles properly. Going to try to match the 1st and 3rd joints like this.
    Screen Shot 2016-09-15 at 5.25.57 AM.jpg
     
  14. Sep 22, 2017 at 1:54 PM
    #14
    nd4spdbh

    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    13,850
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto

    I cant tell but does that CB have a sealed bearing or is it just grease that im seeing.
     
  15. Sep 22, 2017 at 2:09 PM
    #15
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Not sealed, but it does come with 1 dust cover lol. For $30 im gonna try it out
     
  16. Sep 22, 2017 at 2:14 PM
    #16
    greenEFSI

    greenEFSI TacoSupreme____

    Joined:
    Jun 29, 2016
    Member:
    #190830
    Messages:
    1,408
    Gender:
    Male
    First Name:
    Gio
    West Covina, SoCal
    Vehicle:
    '15 TRD Pro Super White
    Good luck @Travis1209! I changed mine out a week ago. Definitely need a puller to get the old cb off the driveshaft. I recommend getting a new u-joint for the center since you have to take it out to get to the cb. Change all three if you can since the whole driveshaft needs to come off anyways. I regret not getting all three lol
     
  17. Sep 23, 2017 at 3:21 PM
    #17
    nd4spdbh

    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    13,850
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto
    I wouldnt recommend that. The slinger (dust cover) they provide is not going to fit properly on the tacoma shaft as its made for the ford.
     
    MTopp likes this.
  18. Sep 23, 2017 at 3:58 PM
    #18
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Just re used the original, about to re install after a quick trip to buy some hardware
     
  19. Oct 12, 2017 at 8:12 AM
    #19
    Travis1209

    Travis1209 [OP] Well-Known Member

    Joined:
    Jul 21, 2017
    Member:
    #224670
    Messages:
    208
    Gender:
    Male
    First Name:
    Travis
    Vehicle:
    2011 TRD Offroad Double Cab SB
    Ok so after a lot of time spent messing with the driveline angles, trying out the Spicer XC carrier bearing, even reinforcing the flimsy crossmember that holds the carrier bearing, i ordered a 1 piece, double cardan driveshaft from Tom Woods. Truck FINALLY drives like new again!
     
    MTopp and lynyrd3 like this.
  20. Oct 21, 2017 at 4:39 PM
    #20
    eccracer104

    eccracer104 O.G. Member

    Joined:
    Apr 9, 2008
    Member:
    #5854
    Messages:
    14,141
    Gender:
    Male
    First Name:
    Mike
    San Diego, CA
    Vehicle:
    2016 Tundra 4x4

Products Discussed in

To Top