Long Travel BS Thread

First one took about eight home run swats. That one was more like 200 and three bottles of water. I think I'm going to get some wings and a beer now.

 

Treat yourself - you just swang through 12 games or so. lol

 

bummer. A year or so ago they sold singles. Guy on the phone even gave 10% off since he was on summer break from my alma matter.

 

Gonna make a big difference. Unless you're jumping your truck (even then not a big difference from where you're at unless you go full blown race lt and link) or hitting whoops I think you'll be satisfied.

 

Normally we sell singles but when we're down to one last set we can't break it up. Once we have more machined here shortly we'll be able to sell one if needed.

- Scott @ Camburg

 

Please guys leave Camburg alone until they ship my LT kit out. Yall are bothering em, slowing my shit down.

 

Anyone had luck putting some elbow grease into a pair of rusty swayaways? The body/threads look rusty from the pics, but gonna scoop them up for $120 from a buddy and rebuild

 

I've gotta move to one of those places...

 

I've had good times with this (50/50 mix of acetone and atf):

https://www.jalopyjournal.com/forum/threads/penetrating-oil-showdown.350800/

Steering rack bolt was all mushroomed up from (I'm guessing) some guy with a rattle gun and an itchy trigger finger - add 10 years of pismo salt, sand, and grit, and I couldn't even get it to budge with my 2 ft breaker bar before the rack started to flex. It just laughed at my 1/2" impact gun. Squirted a healthy amount of this and got it out a few minutes later...

 

I had a insanely rusty pair....cleaned up super well and coated them with a black high temp paint and they looked amazing

 

I think I remember that from your build thread during one of the two times I read the whole thing...

 

Hahha my god!! Was a long.....painful build lol

 

Did you ever get any more head gasket symptoms after that time at the beach? Seems like it was a one time thing after all?

 

Awesome, thanks. Want to be sure I can actually clean them up before spending the money. Need to be taken apart anyway so maybe some powder coat is in order

 

Coating them would be your best bet....sand blast them too if you can

 

Nope!!! That was the only time.

 

Yeah, going to get them to look like new hopefully. Saw on dialed shock prep's page that he made a pair of really bad saw's look brand new so worst come to worst I'll drop them off there.

Just in time too, had some sketchy swaying at high speed with my truck on the freeway. Springs are too soft on the bilsteins for my arb bumper

 

Must have been the 2 trucks in the sand - I guess you could compare it to a hiccup that suddenly pumps up so much pressure in your abdomen, it pushes out a fart that wouldn't have come out for a couple hours.

 

Anyone in OC have some nitrogen to charge shocks?

 

You're lucky that there are companies like Camburg who are willing to split up pairs at all. You already know they have the best deal, and that they're listening. A little patience goes a long way. Good luck getting the same from the other guys.