Painted Dash surrounds BBP

Funny, I was reading threads (thanks for help on removal) about painting dash and other components, which I have in my 911, Console and Dash (Aluminum Look) and wanted to do to my Taco once I got it home from dealer.

Stopped by local paint store I use for Autopaint supplies and had the guys mix me up some BBP BC/CC and a can of Plastic adhesion promoter (>$70.00). Wiped down to remove any grease finger prints, , etc. Primed with Plastic adhesion promoter, After dried, scuffed up with 400 paper (dry). Sprayed Blue basecoat, wait 10 minutes to flash, 2nd coat, wait 30 minutes to flash dry, sprayed 2 coats of clear, 10 minutes between coats, dry to dust 7-10 minutes, hard dry 24 hours.

Simple removal by just pulling on dash firmly, seprate from vent by removing screws on back side. (Lots)

Started with A/C surrounds, I'll do some additional parts once I get a chance.

I'll put them in tomorrow after they have dried 24 hrs.

Mike

 

Nice! Post pics when it’s installed, looks good.

 

Here you go
Sorry phone pics

 

Very nice, might have to do mine...

 

Looks great!

 

Looks good!