A little guidence please

Trying to find an intermediate drive shaft flange (part that bolts to the U-joint yoke) for 1998 4x4 x-tra cab 5spd.... No luck with Advanced, O'Reilly, AutoZone, etc. Tried LKQ and RockAuto... no help there either.... Any advice on a good source for drive shaft parts would be greatly appreciated... preferably in the Ocala/Gainesville Florida area.

Thanks for any tips.

 

@Dirty Pool

Junkyard may be your best bet. Not sure if any driveshafts from Tacomas with other drivetrains would have just the flange you could use on yours.

 

I'd say Dalandser is right. But that part should be easily available at several junkyards. And their inventory is computerized as well. Call one up. If you can get the Toyota part number it would help

 

Have you tried your local drive line shop ??

Then maybe your sourcing parts for them ??

Is this the flange welded to the driveshaft or the one that comes off the carrier bearing ??

Pictures would be a big help

 

http://www.toyodiy.com/parts/g_U_1998_TOYOTA_TACOMA_VZN170L-CRMGKAB_2.html

you can maybe look through this and see the part numbers just for reference

 

Thanks to all that replied.... Frizzman pointed me in the right direction and I found the part at:
www.toyotapartsdeal.com for $60... well worth it.