AZ BS Thread 4²0

Yes super cheap stuff In there. Even buying a half sheet off the shelf wouldn't be pricey.

 

Thanks guys. They are like 12 minutes from work. Hopefully have some time during lunch tomorrow.

 

Looking for 2 Stock spare tires, don't care what condition, as long as they hold air, truck is to be put on a car carrier and need the stock tires so that the tire webbing can strap the trucks front end down securely on the carrier . . .

 

Awesome, thanks!
I'm on the far West side though.
I have plenty of stands but an extra jack may be handy.

 

Something happened today....

 

I's that a free spirit tent up there?

 

So driving around today and my clutch pedal doesn't work to well anymore. Haha. Any one able to help?

Fluids look old but full still. The master and slave cylinder are the originals AFAIK. Same with the clutch. I still have the original torsion spring as well which I know I need to replace as it didn't fully return the pedal before. The new issue though is the pedal will stay to the ground and there is a click when the pedal is depressed. I think it's the clutch but can't see anything when the click occurs. The truck shifts normal besides when the pedal is fully depressed. Clutch works as normal once pedal is returned.

Looking at the linkage on the tranny, the slave moves when the pedal is depressed and returns when the pedal does. Any ideas?

 

That it is. It is the largest hard top auto open unit they have. Picked it up at SDHQ because I couldn't carry one back from OEE!

 

Bad ass! I've been looking at those! Would love to check it out sometime! I just ordered a cheapy from china on a group buy to get into the rtt game. Going to see how much I like it/use it before I step up to something nicer. But when I do, it will probably be a free spirit! That auto is pure bad assery though!

 

Those money's really burnt a hole In your pocket!

 

It really isn't that rare of a problem

 

Look forward to a trip report with it once you have a few nights in it.

 

Anyone else listening to the new PopRocks station on Sirius? Channel 17 for those interested its like all the hits and guilty pleasures from my high school days so like 10-15 year old shit.

 

So a lot of Brittany and Boy bands? No thanks

 

^^^

 

I hear you're changing your build?

 

Like what mick said, a lot more of rock side of things: atari's, three doors down, good charlotte, then randoms like cranberries and so on.

 

@Rextinkleton93 @Delta00 IMS is such a cool place. I grabbed a good sized sheet because it was only $10 and I am sure that I will mess up and have a redo.

What would be a good way to cut this? All I have is a grinder with a cutoff wheel.

 

How thick is it?

 

It didn't say on it. It is pretty wobbly. If I were to guess 16 or 18 gauge. Now that I am back at the office I can see if I have a ruler to get an idea.