abs problems 2009

I changed both front hubs.ended up with an 11,32,and 36 trouble code.11 and 32 cleared.checked all the connections,all looked good.changed the right front abs sensor,although the old one wasn't broke.any ideas?light clears about 30 mph but comes back on at about 65.abs and traction control light.i'm at a loss.thinking maybe I broke the wire from the wheel to the junction by the airbox.I didn't use Toyota abs sensor I went with aftermarket.

 

nobody??Toyota techs,electronics guru's?i'm at a complete loss.

 

I have not looked at mine, but my previous ranger (and Dakota) had abs and non-abs hubs, one I had to move the magnetic ring to the new hub. I don't know how Toyota does this, but are you sure you have the right hub, that none of the magnetic ring teeth were damaged, etc? A missing tooth will cause it to appear that one wheel turns slower than the others, tossing a code...

What does the trouble code reader cough up now???

 

I looked at the old hubs and they didn't have any toothed rings or special dot or anything on the bearings.the abs sensor looks at the inside bearing I think.i've come to the conclusion I somehow broke the wire.i've checked all the connections and still got that light.it still shows a 36.

 

yep I checked the left side at the connector on top and it showed a number on my meter,374 I think.i checked the sensor I took out that I thought was bad.374.checked the connection at the top on the right side.no change,no 374.cant believe I broke that damn wire,i was really careful.wire is 74 bucks from dallas Toyota with shipping and texas tax.

 

changed the wire,no change.went back to the stock ABS sensor,no change.i'm at a loss.i've got to think that hub I installed is just not being seen by the sensor.the quest continues.

 

the stock hubs have no reluctor rings or special marks on the bearings I can see and there still on the garage floor.im assuming they look at that flat nut that holds the prerunner assemblies together.

 

still haven't fixed this.any ideas pop up to anybody.used jersey built hubs.

 

Had same on my '09. Check your brake light switch under the brake pedal.

 

brake lights work.its abs related i just figure can't figure what