What Have You Done To Your 3rd Gen Today?

Thank god for @MidnightRebel07 and that cab mount chop!

 

Great !!

 

awesome man looks great , so awesome there fitting, man I wish I had half of your brain and half of @mesojdm brain my truck would be awesome

 

Still not totally tracking. Does this help?

I’ve also noticed that the side doors might be leaking :/
Heading out of town so don’t have time to run the problem down, but it will be sitting in the rain for the next few days so will find out when I return I guess.

 

Where did you buy this?

 

I have lockers front and rear, I've used them often over the years. I would put your first locker in rear. I use the rear far more frequently then locking both. TRD OR come with locker in rear.
Lock the rear, and if you find you use your rear locker and have occasions when you could have used the front, then when funds permit lock the front.

Honestly I have found most people...and this is just my observation, but most people never find the need to lock.
But if you "wheel" lock away!!!

 

That is probably one of the most useful mods I have made on my taco. I used it to mount a couple of fishing pole holders.

You can get that part at a local Toyota dealer, part#

$56 PT278-35100-BH Truck Bed Header Rail

PT278-35100-BH. I think the part was ~ $50. A word of caution when installing, if those torx bolts are still factory tightened, they will take some elbow grease to come off. The head can be easily stripped if you aren't careful. I believe you need a size 30.

 

Hey I have the same truck just in QS and want to do pretty much the same lift. I was wondering how the ride is since the 5100's? What's the change? Bad? Good? Thanks in advance.

 

He got it from camelback Toyota
This member works there
https://www.tacomaworld.com/threads/gunny-is-back.476544/

 

Love the ride especially with the OME 2886 coils now!

 

Filled up. Too often. Drove home to Alberta from South East Saskatchewan in heavy headwinds. Our client site recorded 122KMH winds overnight.

Normally getting about 15 MPG on the highway, was down to 10MPG for a good chunk of the trip home. A couple of semi trailers blown over in the ditch and watched one trailer's wheels lifting off the pavement as I approached him due to the cross winds. I snuck by him as quickly as I could.

 

SQUADRONS!

 

Updated. Installed. Thank goodness for their bezel. Minimizes the gap by a lot

 

I’m in love

 

It's Toyota Part No

PT278-35100-BH

You can find it on ebay or Amazon, here's the Amazon

$56 Genuine Toyota Accessories PT278-35100-BH Truck Bed Header Rail

link

 

did something a long time coming, derped the badges black. been heavily debating whether I wanted to black them or debadge, figured what the hell, if I didn't like the black, then id debadge, turns out the blacked out is just what I wanted




Edit: I also bought an OEM roof rack, that should be here in a couple of days.

 

I just checked, and there is a very slight lean. I weigh 145 so the lean will obviously be a bit more or less, depending on the person's weight.

 

Plasti-dip? Or a different brand? I know there are a few products out there. Also, how many coats did you use? I really like the look, and might do the same to my wife's Tacoma

 

Online on camelback toyota. If you order >$150 you get free shipping. I'm local here so I did will call.