Hydroflask Cupholder

D ring clipped onto the vertical bar for the passenger head rest. Either with a hydroflask or camelbak. You could also make a little loop with some paracord for the hydroflask as to avoid stress on the plastic.

 

Thats what I did in post #46. Adjustable too!

 

you're an old grumpy man.
sometimes when I'm on the forum and my girlfriend sees your post she just looks at me and says 'thats probably going to be you when you're older.'

I just look at her and say 'older?'

hahaha according to her I'm very grumpy

 

Personality differences aside, you can't dispute his reasoning. According to him he needs to roll with a hydration device at all times because the only other choice is to drive drunk.

 

You funny. Ha, Ha.!

 

I’m using an Arby’s cup in the rear console. Works well except it sticks to my Thermoflask sometimes.

I also got a Smart Kup adapter but it rubs against the armrest cover and gets in the way when opening/closing it. It’s also a loose fit for my Thermoflask so it kinda wobbles around on turns.

Smart Kup - Car Cup Holder - For Hydro Flasks 32 oz and 40 oz, Nalgene 32 oz and other large bottles up to 3.8"es wide. 3" upper cup will hold your items unlike the competitors.

https://www.amazon.com/Smart-Kup-Nalgene-bottles-competitors/dp/B018USPD82

 

Will prob be getting one of these for my Gatorade bottles.

 

Like many others I have been struggling for a convenient place for my Hydroflask that doesn't require it rolling off the passenger seat onto the floorboard. I once had a BWM that I found hooks that hung over the edge of the center console to hold onto bigger things or to hang trash bag on. I noticed the flask while standing behind the center console in the back seat would be low enough to hang from some sort of hook mounted in the passenger cup holder. It would also not impend on any of my passengers if hung here. Any ideas or fabrications that could make a hook here to hang from?

 

Just ordered this. Will let you know how well it works. Someone else with a 2017 posted a pic on Amazon and it looked like it worked well enough. This is their updated design so hopefully it works better than the original one others in this thread have tried.

BottlePro Version 2 - Adjustable and Extendable Car Cup Holder Adapter for Hydro Fla...

$17 BottlePro (1-Pack - Adjustable Cup Holder Adapter, Compatible with 32/40 Ounce Hydro Flasks, Iron Flasks, Takeyas, Simple Modern, Nalgenes, Fifty Fifty, Thermoflasks, Klean Kanteens

https://www.amazon.com/dp/B01M028L5E/ref=cm_sw_r_sms_c_api_.4IEBbPNX00HD

 

If 40 oz. of water lasts a few days then you should drink more water.

 

Anyone come up with a nice solution for a 64 ounce hydro flask? I've been thinking about sketching up and 3D printing something that would clip to the front cupholder and hangover the passenger seat foot area to hold it.

 

I have this dream where I cut one of the cup holders out of my console and install a 3D printed cup holder that is big enough for a nalgene.

 

You guys haul water in the truck?
I live and work outside a lot in AZ and never had water in any vehicles in over 20 years. Thirsty? Stop by CK, 7/11 any fast food place and ask for water.

 

I just carry mine around my neck with some old anchor chain like Flavor Flav...problem solved.

 

I live in AZ too , my 64 ounce hydroflask is either in my truck or at work. Not sure how you don't have water on you all time, maybe I drink a lot of it, at least 1.5 gallons a day

 

***
About 1 bottle a day.

 

i used to do the same thing until one day i forgot to grab it before opening the door to get out of my car, and it fell out onto the ground. dented my bottle real bad. be careful!

 

Alright, just got this a few minutes ago. Didn’t think it’d fit nice and tight in the factory cup holders but I got it to work.

I used the middle base with the included coozie over it to get it a little tighter, as well as making sure the cup holder clips were in the up position. Look at the last pic for reference.

This is probably the best option out there for a quick solution. I also like the fact there’s a cut out for a handle so you can fit bigger mugs of coffee or whatever in it.

 

Fits fine.