I don't know my "lift" in the rear.

So the top of my fiberglass bedside is 54" and my tire size is 34.5" (35x12.5x17)

I built my own leaf pack using random leafs swapping them in and out of the stock leaf pack. I have no clue what my lift is and people keep asking me.

I was just wondering if anyone with a stock Tacoma can measure from the ground the to the top of there bedside and toss in a tire size too. Or center of the hub to the top of the bedside would work too.

 

I don't think there's anyone left here that isn't lifted.

With that said, I just measured, and I have somewhere between 37.5 - 38 inches, from center of hub to top of bedside (with a 2" lift), so stock should be 35.5 - 36 inches. It's tough see accurately because of the curve in the bed (you can't get the measuring tape straight).

 

got any pics of your custom pack?

 

I think I recall that the stock measurement for the rear is 22" from center of hub to the edge of the fender, not sure what that would be to the top of the bedside.

 

lol yeah everyone here has mods.
Hummm I have a 2" lift I guess. Seems way higher...

That's basically it. I don't think I changed anything else besides the valving.
https://www.youtube.com/watch?v=QK3p3CMDGbU

Yeah, I have fiberglass bedsides=[

 

I miss Barstow just for the wheeling living there was hell on earth. My old rig when I lived there. Pic was taken at coyote lake on our way to work at FT. Irwin.

 

Looks like a fun drive to work.

 

It sure was got super familiar with the area my funnest run was Barstow to primm.

 

Awesome! We just start at Hodge rd then wander around finding new spots every time we go.