03 Tundra Rims

Just found some 03 Tundra 16 inch 6 hole steelies. They were cheap, im cheap... its a good match. Has anyone done anything interesting with these? Can i use a modern center cap to spruce em up maybe?

https://goo.gl/images/PMu4Kg

They didnt come with caps.. fitting them on an MGM so perhaps a flat black finish?

Have some 265 70 r16 duratracs planned.

 

I think those are hideous, but my opinion doesn't matter. Do what ever makes you happy.

If you decide to go this route I would suggest test fitting them. Early 00's 4Runner steel wheels do not clear the front calipers on a 3rd gen. I suspect these might be a similar case.

 

Also steelies are pretty heavy. I went from steel 16" wheels on 255/85/16 tires to 17" 285/70/17s and they weigh almost exactly the same.

 

They are better looking and 100% better quality than 1/2 the aftermarket shit I see posted here. Paint thsm black / grey and be done with it, they are winter wheels afterall.

 

They will fit, I use them as my winter wheel with 265/75/r16 tire. they are 16X7 if I'm correct, offset is 15mm so they'll give you some more stance if you usualy run the stock sport rim. Flat black is the way to go!

 

I read "they were cheap" as they are cheap so I wasn't aware you had already bought them. Glad to hear they fit without issues. Spec wise they sound similar to the 4Runner wheels I tried to put on mine. $250 later I found out they didn't fit