ABS!!!

Question i need to know ASAP I found an elocker axle for my truck but mine is non abs the one I found is abs is it Possible to run it on my truck without abs will the brakes works if not is there a way to bypass it?? Pleas help need to know fast before it’s gone!! Thanks!!

 

Yes it should be fine. My truck has abs but one of the sensors went bad so I just removed the abs fuse and the truck still stops fine. Better than it did with the bad sensor too.

 

Yep 01 abs elocker axle on my 98 w/o abs.

 

Thanks guys good to know does it matter if I’m taking it off a 2wd truck does it have to be off a 4wd truck

 

Manual or auto might have a different gear ratio. Just check the door panel code if it's a complete truck:

https://www.tacomaworld.com/threads/oem-gear-ratio-chart.365138/

 

You can also spin one side of the axle while keeping the other side from turning. Count the number of times the drive shaft flange turns to calculate ratio.

 

I also did this. Difference for me was the ABS Brakes have a different setup for the E Brake.
I think I can get an ABS E Brake cable and make everything work but haven't yet.