1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rattle/vibration noise from under hood.

Discussion in 'Technical Chat' started by jrg66, Sep 3, 2008.

  1. Sep 3, 2008 at 8:13 PM
    #1
    jrg66

    jrg66 [OP] New Member

    Joined:
    Aug 1, 2008
    Member:
    #8284
    Messages:
    3
    bc-canada
    Vehicle:
    tacoma trd 4x4
    I recently checked my air filter to see if was dirty. I unclipped the two clips, pulled it apart, checked the air filter, then put everything together. Now when I start and back out my garage it makes a loud vibration/rattle sound. I doublechecked the clips and everything seems fine. the sound even vibrates even at around 1500 rpm going up slight hills and when I step on the gas.

    wondering if anyone has had this problem or any solution before I go crazy

    any advice would be helpful.
     
  2. Sep 3, 2008 at 8:14 PM
    #2
    tacomaman06

    tacomaman06 Carolina Alliance: Enforcer

    Joined:
    May 1, 2007
    Member:
    #1475
    Messages:
    26,212
    Gender:
    Male
    First Name:
    Will
    York,South Carolina
    Vehicle:
    '16 Tundra TRD Pro
    getting there....
    check the air hose where it goes into the fender.......that part may be loose
     
  3. Sep 3, 2008 at 8:18 PM
    #3
    The_Hodge

    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,714
    Gender:
    Male
    SC
    Seeing the third gen section forced me to get a Ford...
    make sure that the back 2 pegs are in their slots. u can still clip the front, but not have the pegs in and it'll prolly vibrate.
     

Products Discussed in

To Top