Turn signal mirrors

Only way to know for sure is to check the white harness. Pink wire should be positive and white wire ground. Turn your turn signals on and see if the pink wire gives a 12v pulse

 

now that its been a few years.. still like the mirrors? if so, do you have the part number?

 

I would not bother with them if the are TRC brand or some other Chinese brand. They might look the same and work but if they screw up or you break the mirror, good luck in finding one as the mirrors are smaller then a regular Tacoma and the backing plate is not the same so nothing fits you have to buy another whole assembly. Figured this out when I bought a pair and wanted to heat them. Mirrors are stuck to the backing plates with a combination of hot glue and RTV and you will break the mirror trying to remove it. Your original mirrors have a shell over them that comes off and you should see the place where the light bar goes. Now this light bar is the same for the 2015 and down Tacoma sport, 2009 to 2012 RAV4 and the same years Sienna. Toyota wants $130 a piece for them up here in Canada but the junk yards are full of them for $10 a piece. Toyota sells the sport mirror cover with the cutout in your trucks color for around $60. Then you have to run wiring back to connect them up. Worked for me.

 

I just bought the 2012 Factory side view mirror lights (before reading all these feeds). I have a 2010 TRD tacoma. Is there anyway to wire the turn signal to make it work? The mirror adjust and that plug and play works fine. Just need to know how to wire the signals to work. If not they are going back for sale.

 

Which white harness and where is this located??

Any pictures?

 

Not sure of quality but these are in stock.
https://www.ebay.com/itm/Mirror-Set...?fits=Year:2015|Model:Tacoma&_trkparms=ispr=1