1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

cali raised oem switch, How do I reconnect wire into connector?

Discussion in 'Lighting' started by Islandchanel, Nov 16, 2017.

  1. Nov 16, 2017 at 10:58 AM
    #1
    Islandchanel

    Islandchanel [OP] Well-Known Member

    Joined:
    Sep 28, 2015
    Member:
    #165317
    Messages:
    249
    So I was stripping wires from my cali raised oem ditch light switch and one of the wires popped out of the back of the connector. I tried to pry it open and push the wire back in and smash it back down with a tiny screw driver. But it keeps coming back out. I can’t seem to get the metal pin to release either so I could do it outside of the harness. I was thinking of trying to solder it in but not sure if I can find a small enough soldering tip. Any suggestions would be appreciated.
     
  2. Nov 16, 2017 at 11:03 AM
    #2
    Unchained 5150

    Unchained 5150 Rick

    Joined:
    Sep 25, 2014
    Member:
    #139054
    Messages:
    65,421
    Gender:
    Male
    First Name:
    Rick
    Auburn Ma
    Vehicle:
    2021 TRD Poser Pro Manual.

Products Discussed in

To Top