1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Seafoam question Air filter upgrade Spark plugs VMS Oil Catch Can Install In need of good sounding muffler Supercharger check list.

TRD supercharger

Discussion in 'Performance and Tuning' started by JMITCH08, Dec 3, 2007.

Page 254 of 263
  1. Nov 22, 2017 at 10:27 PM
    #5061
    Torspd

    #5061
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,682
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Quit being stingy. :p
     
    Torspd, Nov 22, 2017
    #5061
  2. Nov 27, 2017 at 12:17 PM
    #5062
    mightytacoman

    #5062
    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,406
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    For the boost referenced fuel rail mod. Has anyone tried it that runs a fuel pressure gauge to confirm it works? Seems to me and feel free to correct if im wrong- say you're at 10psi boost, the fuel pump is gonna either back off to maintain the pressure it likes (44psi IIRC) or it's gonna be working harder to pump at the new psi of 54psi and adding extra wear to it. Someone enlighten me.
     
    mightytacoman, Nov 27, 2017
    #5062
    GT7 likes this.
  3. Nov 27, 2017 at 1:43 PM
    #5063
    Torspd

    #5063
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,682
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    In vacuum it will reduce fuel pressure, and in boost it will raise the fuel pressure 1 PSI per pound of boost.
     
    Torspd, Nov 27, 2017
    #5063
    12TRDTacoma and inwood customs like this.
  4. Nov 27, 2017 at 8:05 PM
    #5064
    ThomasMore66

    #5064
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,289
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    I still think it’s working fine.
     
    ThomasMore66, Nov 27, 2017
    #5064
  5. Nov 27, 2017 at 8:06 PM
    #5065
    inwood customs

    #5065
    inwood customs Roaming potato

    Joined:
    Sep 11, 2016
    Member:
    #197024
    Messages:
    4,644
    First Name:
    Dave
    Vehicle:
    2006 v6 potato bugTuRD
    K&n, flowmaster, plastidip, chipped, hids, daves
    does the wideband going from 11s and 12s at WOT down to (10:1 when referenced) or even richer count?
     
    inwood customs, Nov 27, 2017
    #5065
  6. Nov 27, 2017 at 8:10 PM
    #5066
    ThomasMore66

    #5066
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,289
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    Mine dips on tip in and then levels out just like it always did. I kinda thought it pinged when the jet was in there. For sure there was a bit of lag.
     
    ThomasMore66, Nov 27, 2017
    #5066
  7. Nov 27, 2017 at 8:18 PM
    #5067
    GT7

    #5067
    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    How can you hear ping? I always try to listen but can never hear anything
     
    GT7, Nov 27, 2017
    #5067
  8. Nov 27, 2017 at 8:37 PM
    #5068
    snowsk8air2

    #5068
    snowsk8air2 how hard can it be?

    Joined:
    Sep 16, 2011
    Member:
    #63607
    Messages:
    10,182
    Gender:
    Male
    First Name:
    Ryan
    Flagstaff, AZ
    Vehicle:
    Supercharged TX Pro
    2011 S/C and basic mods
    This^^^ between intake, s/c, tires, and wind noise, even if I turn the stereo off, there's no way in hell I'd be able to hear a little bit of pinging. And I really know what to listen for. My truck is safe to drive or not scale is based on OBD calculated afr's, catastrophic sounding sounds, seat of the pants feel, and 6 years of motorcycle related performance work.
     
    snowsk8air2, Nov 27, 2017
    #5068
  9. Nov 27, 2017 at 8:39 PM
    #5069
    GT7

    #5069
    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    Yeah shit is loud as hell, I tried a couple times and gave up
     
    GT7, Nov 27, 2017
    #5069
  10. Nov 27, 2017 at 8:40 PM
    #5070
    snowsk8air2

    #5070
    snowsk8air2 how hard can it be?

    Joined:
    Sep 16, 2011
    Member:
    #63607
    Messages:
    10,182
    Gender:
    Male
    First Name:
    Ryan
    Flagstaff, AZ
    Vehicle:
    Supercharged TX Pro
    2011 S/C and basic mods
    Same. Put s keen ear to the window/ engine after someone was complaining about pinging from removing the brass jet last week or whenever it was
     
    snowsk8air2, Nov 27, 2017
    #5070
    inwood customs and GT7[QUOTED] like this.
  11. Nov 27, 2017 at 10:54 PM
    #5071
    loginfailed

    #5071
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    That someone was me. It was there without the jet, and has gone away since reinstalling it. I have a set of those keen ears you speak of. :thumbsup:
     
    loginfailed, Nov 27, 2017
    #5071
    12TRDTacoma, Biscuits, ls1 prerunner and 1 other person like this.
  12. Nov 28, 2017 at 9:10 AM
    #5072
    Vertical_Taco_74

    #5072
    Vertical_Taco_74 New Member

    Joined:
    Nov 28, 2017
    Member:
    #237137
    Messages:
    2
    Hi everbody. I'm looking into buying a Certified 2011 Tacoma TRD with the SC from a local dealer where it was initally sold. It has less than 28K and they are asking 27.9 for it. Anything that I should be wary of?[​IMG]
     
    Vertical_Taco_74, Nov 28, 2017
    #5072
    jojotoo likes this.
  13. Nov 28, 2017 at 9:12 AM
    #5073
    GT7

    #5073
    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    Price sounds high. 4wd?
     
    GT7, Nov 28, 2017
    #5073
  14. Nov 28, 2017 at 9:18 AM
    #5074
    Vertical_Taco_74

    #5074
    Vertical_Taco_74 New Member

    Joined:
    Nov 28, 2017
    Member:
    #237137
    Messages:
    2
    Yes. 4X and Crew Cab. I'm going to work on them on the price a bit. Could have potential for a fun project.

    [​IMG]
     
    Vertical_Taco_74, Nov 28, 2017
    #5074
    JuanitoBonito, loginfailed, ls1 prerunner and 1 other person like this.
  15. Nov 28, 2017 at 9:49 AM
    #5075
    ThomasMore66

    #5075
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,289
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, WAT trans valvebody, FIC 650cc injectors, HP Tuner.
    Low miles.
     
    ThomasMore66, Nov 28, 2017
    #5075
  16. Nov 28, 2017 at 10:24 AM
    #5076
    Torspd

    #5076
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,682
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Low boost
     
    Torspd, Nov 28, 2017
    #5076
    TRON and loginfailed like this.
  17. Nov 28, 2017 at 11:30 AM
    #5077
    ls1 prerunner

    #5077
    ls1 prerunner Internet Scientist

    Joined:
    Jun 19, 2013
    Member:
    #106580
    Messages:
    709
    Gender:
    Male
    First Name:
    Andy
    El Paso, TX
    Vehicle:
    19 Golf .:R & 11 4x4 TRD LT S/C
    TRD S/C, Camburg LT, DMZ SUA, SAW Shocks in all four corners, Glassworks hood, fenders and Bedsides, 35" Toyo MT, KMC Enduros
    Just like mine too... I was/am trying to sell mine for $28k but has 65k miles. TRD supercharger with long travel suspension and lots of other goodies.
     
    ls1 prerunner, Nov 28, 2017
    #5077
  18. Nov 28, 2017 at 11:46 AM
    #5078
    GT7

    #5078
    GT7 One piece at a time

    Joined:
    Aug 15, 2014
    Member:
    #136201
    Messages:
    2,502
    Gender:
    Male
    First Name:
    Grant
    Phoenix
    Vehicle:
    2013 DCLB
    Part out....... :boink::D
     
    GT7, Nov 28, 2017
    #5078
  19. Nov 28, 2017 at 11:53 AM
    #5079
    TireFire

    #5079
    TireFire Superunknown Member

    Joined:
    Feb 6, 2016
    Member:
    #177349
    Messages:
    7,430
    Olympic Peninsula
    What grade steel is the supercharger casting made of?
     
    TireFire, Nov 28, 2017
    #5079
  20. Nov 28, 2017 at 11:55 AM
    #5080
    drr

    #5080
    drr Primary Prognosticator

    Joined:
    Oct 17, 2013
    Member:
    #114681
    Messages:
    2,538
    Gender:
    Male
    First Name:
    Dan
    Seattle-ish
    Vehicle:
    02 4WD Tacoma
    Aluminum grade.
     
    drr, Nov 28, 2017
    #5080
    Biscuits, mightytacoman, loginfailed and 3 others like this.
Page 254 of 263

Products Discussed in

AEM (30-4110) UEGO Air/Fuel Ratio Gauge
$166.29
Denso 5346 Spark Plug
$11.09
Denso (5345) IKH22 Iridium Power Spark Plug, (Pack of 1)
$8.47
OTC 8263 9.25" Long Pick and Hook Set - 4 Piece
$31.90
Spectre Performance 9831 Air Filter for Air Box
$100.99
AEM 50-1200 E85 In-Tank Fuel Pump, Black, 4.055 x 1.535 x 1.535"es
$120.52
To Top