Various 2nd Gen Stuff (Prinsu Rack, ARE Cap, Backrack etc)

Located in Scarborough

ARE Z-Series 5ft Cap, Insulated Roof, Remote Unlock, Yakima Rails & Roof Rack, Tinted Windows, sliding rear window SOLD

Prinsu toprac (5ft) for short bed caps (Powdercoated with 1x2 crossbars) $550

Backrack Safety rack with stock bed rail mounts for 6ft or 5ft bed $120

Backrack tonneau cover mount adapter (needed if you want to run a back rack and tonneau cover together. Only used for a few weeks, over $200 new) $120

Custom made bed frame for 5ft tacoma short bed for camping/storage FREE (come pick it up!)

 

Some good shit here!

 

At first I thought you were selling the cabrac and I was about to tell you to fuck off. Ordered mine in July and picked up last weekend.

 

Ahahaha, I bought a cabrac + toprac combo from a local guy. Im keeping the cabrac for obvious reasons but im selling my cap so the toprac has to go.

You have your cabrac installed yet? Pics?

 

Derailing your thread a bit but...
I test fitted it tonight to see how it work with my lightbar. I just have to but some 1/4" bolts that are a see bit shorter and t slots to hold it.

I also have all the hardware a couple coats of flat black since it came kinda beaten up


Other than that this is how it will probably look

 

Awesome!! I should of painted my spacers black.. Shit.. I just covered them in black silicone. Thats the same thing right? haha.

Are all your spacers the same height? I noticed when the rack is mounted it sits a bit higher on the roof and you can see the spacers in the rear. Not my favorite part of the rack thats for sure. I already siliconed them in place so theyre basically there for good. I would have to start over and clean up the massive mess that the silicon would undoubtedly cause if I wanted to shorten the spacers.

 

Lol my spacers are raw aluminum along with the rest of my bolts. I didn’t paint shit. Haha

 

honestly i think because its the back of the roof that slopes down, id we were to shorten those spacer heights on just the rear we may not have a level rack. im thinking of shortening them the entire way around the truck but gotta do some searching on the prinsu rack thread to get an exact amount

see its so much easier to do it while its apart and you havent put it on yet haha

 

You cant really shorten the front spacers any more, rack is like 1/4" or less from touching the roof on the front. Then its like 1/2" or more in the rear. Only ones that could be shortened are the rear ones and maybe the middle one a little bit.

I hear you though, it may effect the level of the rack. Im way too OCD about this shit and it bugs me more than it would somebody else who probably didnt even notice

You dont have the weather strip on either haha, definitely an easier install on your end

 

Updating things: Cap is sold, and custom bed I built is free, just come pick it up! Need to start clearing stuff out as ill be moving soon and cant bring most of this stuff with me. Reduced prices on other stuff as well

 

my buddy is gettting a taco with a short bed so i can probably take that off your hands

 

^
Damn would deffs pick this up if I lived in Ontario!

 

Where did you get those covers for your rear lights?
They look nice