how to change programs with shift sense pro V2?

I tried searching but couldnt find the answer (maybe my search game is weak).

I bought a SSP V2 from a fellow member so I dont have the instructions. I want to try the 3 different settings, how do I change them?

TY

 

Have you tried the company web site??? Googled how to do it???

 

https://www.tacomaworld.com/threads...ift-controller-for-gen3-tacoma.490113/page-92
Post #1835

The instructions for switching among the three maps:

1) Turn the ignition to On position (engine off).
2) Depress brake and shift to S mode.
3) After 8 seconds, unit will enter programming mode, (indicated by a long beep).
4) Immediately after that it will provide either 1, 2, or 3 beep corresponding to the currently selected shift map.
5) Use the shift lever (+/ -) to change to the desired map selection (it will provide beeps as you index it to indicate the current selection).
6) Shift back to neutral or park. This stores the selection in memory.
7) Start engine and go...

If you ever want to change it again, just perform this process. For safety reasons, programming does require the engine to be off, so it cant be done 'on the fly'. However Ive done it several times at a stop light. Takes about 20 seconds to turn engine off, make the selection, and get back on the go.

 

TYVM