NJ B.S. Thread

They’re cheap enough. Don’t see any reason to build one. I already have some projects in mind

 

This and scuff it with some course sandpaper.

 

Fireside grill south main st.

 

Price?

 

@Nimble9 take a ride to Red Bank. Cool town. Bars, music, good food places. There's a few nice blocks to walk around. If work sends you to Marlboro often look up the Count Basie Theater in Red Bank maybe catch something good.

 

Makes noises and all types of shit but it’s a lot better than it was last year.

 

Just finished up @V5ioV write up on FLATM. Been a long time coming, not sure why I waited so long. Took under an hour with lots of beer breaks. Being able to turn on amber lights only makes me stoked for snowy night wheeling. Thanx for a short and sweet write up. You can find it in his signature.

Led pods with amber covers



42” curved roof bar with amber covers and fogs

 

Throw me 100$ and take all 4

 

I'm off tomorrow I'll dig them out of my basement if u want to take them. Still has fresh tires on em too

 

Took the removable half of the shackles off and slid the leaf pack over so I can grease at least the sides of the bushings that touch the shackles. Figured it was a much easier step to try before actually disconnecting the packs from the truck. Greased 'em up and reassembled. Went for a ride and sure enough, creaking is gone. What a relief. It was embarrassingly loud around sharp corners or over big bumps.
I want to do it right and grease the entirety of the bushings at some point, but this solved the problem, so this will do for now.

 

Your only 15 mins from the shore. I live in Marlboro. If your bored one night HMU

 

Ill let you know next time I am up there. Don’t go diggin them out now. Might not be up there with free time for a bit. Can’t swing the 100 til after the 16th either. I don’t live on credit so Im pinching pennies

 

I figured I'd post them here in the local forums; I'm selling a set of 4 oem 2nd gen trd wheels in good shape without tires for $150 OBO picked up in NNJ

only pic I have right now but I'll take some up upon request

 

no tires. throw me an offer, i want them out of my garage

 

I thought the same thing as joe... then I found one that had drawers and it will probably fit a plasma on the bottom and have room for a bottle still

 

$290 LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" Clean Cut

https://www.amazon.com/gp/aw/d/B004VFJL14

 

That one is way too big for the cart. The Hobart Anthony has is alot smaller but way more money. Maybe Ill get that cheaper one...

 

After several long breaks the actuator is done and I believe it works
Only real test I could do was trying to take a turn and it was bucking so I assume 4wd worked.
I swear to god if I need to do this again anytime soon...

 

Guess I know who to call if I need to do it again.

 

W-H-E-E-L-S