Anyone know the offset of the TRDOR stock wheels

I’ve searched and coming up with nada.

I have MB 352 wheels that are a -6 offset. The fake beads keep falling off, so DT is swapping them out for me. I found some nice ones that I like, but they are a 0 offset. I just need to make sure they will fit my tires without having to chop. As long as they come out further than stock wheels, I’m good.

 

the offset for each rim will be accordingly different depending on the design of the rim face. on my vision fury rims, 25 offset cleared the brake calipers but a 0 offset wouldnt due to the design of the arms on the rims face, even though a 0 offset would make the tires sit flush, and the 25 offset push the tires out 1/4" past the fender well.

i prefer not to have the tires out past the wheel well since it throw up crap on the side of the truck.

 

It is +30mm.

 

What’s the difference in +30mm and 0? Is it about an inch?

And thank you for the reply.

 

30/25.4 = 1.18 in.

 

16" wheels are +25 offset and 17"/18" wheels are +30 offset