What Have You Done To Your 3rd Gen Today?

it can track funny in ruts on the highway if you dont use 4. if you dont notice it you dont need to do the rear

 

lol, you linked to a thread where someone asked it and was told to search.. and was then provided a link to another thread.

 

Drove home from work this morning.

Cool & damp weather.

12 miles of rolling hills interstate and 10 miles of stoplights & neighborhoods.

She doesn't do bad considering I'm driving my hunting/fishing/scouting 4x4.

 

Installed Kings with adjusters front and rear. Also installed Front Runner bed bars for my RTT.

 

I think that made it that much more awesome.

 

Nice!!! Love mine. Big difference on how it rides for everyday driving.

 

You won't run into any rubbing issues at that size. It's a very common size for owners to upgrade to, so no wheel spacers needed. With that said, I run wheel spacers because I wanted to keep my stock TRD OR wheels but have a more aggressive offset look (with plans on upgrading to 285s in the future).

 

Installed the Mobtown sliders last night and into the morning, took a while working alone.

 

Someone needs to buy these!!

 

What brand is your shell? What did you use to seal the bedside mouldings and other areas at the front? Any pictures of what you did would be awesome...I am getting my shell installed tomorrow.

 

good looking out. I already have bed stiffeners from all the racks.

 

Who ya gonna go with for the install?

 

Looks good man, and already nice and dirty! I have a pair of these ordered, and will likely have to install alone....how many hours is "a while"? I've read I need a minimum of two jack stands and a six-pack to do it right.....

 

Looks good! i have MB-352's as well. are you running spacers too? mine don't stick out that far. i got the 18mm offset.

 

Thank you and Yessir! I've got the 1.25" Spidertrax on there but my wheels are only the -6 offest

 

My cousin has his own shop so he’s going to do it for me. I’m taking them in to get the Gears all setup at Dan’s Gears located in Sherwood

 

What I am looking for is input from some one who has done it. What kit did they use? Was it a useful mod? I did read that link.

 

looks so clean!

 

Well, it took me about 1 hour for the passenger side because there’s nothing to remove except one bolt. I’d say about double that for the drivers side. The way i did it was to lay down and basically bench press the slider up until i had the front and middle bottom bolts lined up then using my knees i supported them to start the middle bolt and front nut. Wasn’t too bad.... but there was a few curse words said and told myself i would invest in jack stands if i ever did it again. Overall they fit great and it’s an awesome addition to the truck! And yeah it rained all day yesterday so it was super muddy and I’m super Impressed with the STT Pros and even used the sliders a bit going through a washed out creekbed.