Lug Nuts

Just ordered a set of TRD Pro 17" wheels from dealer and buying told i need a set of $167.00 lug nuts, is there correct?

 

Spline lugs? You can get them cheaper anywhere else

 

You are bidding a complete set (2 front & 2 rear) of Genuine Toyota / TRD Factory 4Runner BLACK Finish 17" Alloy Wheels with Center Caps - 1984 to 2018! These are new and unused (

$1,025 PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)

PTR20-35110-BK) - they are not take-offs and they are not grey painted black! This is the same style featured at SEMA. I have access to a few sets but I do not know how long I will be able to obtain them! Features include:

• Unique
  • Made by TRD for Toyota.
    • Low pressure cast aluminum.
      • 17" x 7".
      • 4mm offset.
      • 6 x 139.7 bolt pattern.
  • Rim is TPMS compatible (stock 20 degree sensor only).
• Toyota Recommended Tires
  • Stock OE 17" Tires P265/70R17 113S
  • Bridgestone Dueler H/T D684 II A/S
  • Dunlop Grandtrek AT20 A/S
• What you receive
  • 4 rims.
  • 4 center caps.
• What is not included
  • TPMS (note above).
  • Tires (note above).
  • Lug nuts - this is important!
    • Stock lug nuts do fit.
    • You will reuse your existing lug nuts.

 

Not sure.

 

Look above it's the last sentence you reuse your stock lugs

 

I got it, thanks. any reason other then them trying to make money, why they would tell me that?

 

You stated it to make money, this the wheel you bought?

 

that's it, thank you.

 

You can use these lugs to they are a little smaller but the same. I just used them on my truck with these.

https://www.ebay.com/itm/24-Toyota-...:sc:ShippingMethodExpress!01501!US!-1&vxp=mtr

 

And these wheel locks if you want black as well.

https://www.ebay.com/itm/4-LOCK-GOR...ash=item5d3cb8edac:g:eWsAAMXQhuVRVkAF&vxp=mtr

 

Not sure as I don't know if those are an actual OEM wheel, or a copy in the style of the wheel. Is it a good price I guess so, but I like to stay OEM, not OEM Style as those are 16x8 and I believe OEM is 16x7. Maybe somebody else will chime in on it though

 

That's a tough one to explain while in driving @nd4spdbh knows a thing or 2 about offsets.

 

I would go with those and those are a Genuine OEM part

 

I was told I need a $120 set of trd spline lugs by the stealer today. Other dealer sites say the shank style lugs will work. I have steel wheels now n they use acorn style

 

Did the lugs from the steel wheels work?

 

I'm still waiting for the wheels. However I do not believe they will. It is the regular acorn style for steel wheels.

 

This is right in the listing for the 17 inch SEMA Wheels posted above.

This listing is for a complete set of 17 inch Black TRD Pro wheels for 4Runner, FJ Cruiser, & Tacoma. OE tire size for 4Runner/FJ is P265/70R17. OE tire size for Tacoma is 265/65R17. Center cap is included. These wheels use the OE-style flat seat lug nuts with washers attached. If you currently have factory aluminum wheels, your lug nuts should work. If you have factory steel wheels or aftermarket wheels you will need new lug nuts (not included). TPMS sensors will transfer from OE aluminum wheels.