2005 Taco wire schematic??? Where

Looking around for hour for 2005 taco truck with 4 wheels wire schematic? Why is it so hard?

 

what exactly are you looking for?

 

Just looking for sch on truck wires. fuse box wire colors, etc. I want to tap a hot line for my LED head lights(small ones for daytime running). I just need a wire to tap into for Ing on power.

 

When I wired my electric fans in my 03 v8 swap I tied them into the power ports relay at the fuse box. They worked fine and the power ports are only on when the truck is. I asked because I have electrical wiring diagram manuals for 03 4runner 06 tundra, and 03 tacoma. What I have learned is that there are a lot of similarity's between them. The 06 tacoma I have is pretty close so far that I have seen in wiring, to the 06 tundra. I want another v8 to find out how similar though.

 

Not sure if this thread might help?

https://www.tacomaworld.com/threads/05-drl-daytime-running-lights-install-oem.1475/

Was my first Google search result.

 

You also can dig deep into the dash and find a junction block witch often has unused pins.

 

Yea thanks. Any chance anyone has the color code for the junction box wires? Should tell me what wire I am tapping into?

 

Basicly I need light to mod power supply after Ignition is on, to power my Anzo running lights LED and CFL Halos on Ful ltime running...... Was thinking Cig lighter

 

The extra power ports should be separate. I am going outside to look with my book.

 

I do not really know if your truck is like mine, but this is what I would do. This spot is empty in my truck
you can steel power from here and even fuse it. Idk. It only powers up with the key.

 

Do you have a multimeter? You can check slots and see if they get 12 volts with ignition on. I have a cheap harbor freight one that works just fine.

 

Here you are.

http://www.customtacos.com/tech.old/files/05FSM/wiring.html

As others have mentioned, for something as simple as you want to do, a multimeter and an add-a-fuse will get the job done.

 

Thanks Guys for your help. I did what you suggested, I used an ad fuse and set it in an empty slot as well.
Set the Halos and Led on daylight running-IGN on and main HIDs up on knober.

Double Cheers