AZ Trd supercharger 3.4

Black Trd super charger for 1st gen Tacoma 4x2, 4x4 V6 5vz-fe.

Used and missing parts, should be gone thru. Some small contact on rotor coating, rotor looks good. Case has light wear lines, indicates rear needle bearing wear. Back wall is perfect, indicates main center bearing is in spec thrust wise. Personally I'd lightly sand everything or strip the coating (heard meth injection eats it anyway) then put new bearings in it and the nose cone (160 on ebay for bearing and seal kit)
Needs new bypass valve(99)
Missing tensioner (40-55)
Missing Gaskets, pcv (50)
Missing hardware and brackets. (Could fab or buy all-thread at Home Depot)
Magnuson will sell some small parts and accessories reasonably priced.

-Includes used supercharger
-New tensioner bracket with hard to find metric bolts.
-upfront pics and info

SOLD

 

Looks like a good candidate for a port job, figure out a way to liquid cool it?

 

The port looks pretty good on this one, sure you could do more if you want. Just run meth injection, that will cool it, fuel it and add octane so you don't have to pull timing. @mtnkid85

 

Looks like a bargain. Full rebuild kit is around $100 IIRC.

 

More like 6-700

 

For a new nose cone? You can get all the bearings, seals, coupler and oil for around $100.

 

For a rebuild kit with re-coated rotors.

 

be patient