2016 shocks on a 2010?

So, can I put a set of factory 2016 TRD OR shocks, struts, and coils on my 2010?
IF so, will it result in any lift?
Thanks

 

Yes. You'll hear anything from an inch gained to nothing. I'll be doing this in a few weeks to my brothers single cab 4x4 and I can tell you the results then.

 

I have shocks struts and coils from a 16 OR on my 09 Base. 1 inch lift in the front, little stiff but overall a nice upgrade.

 

So we got them installed today. The new struts had 5k miles on them and we got 1 3/4" front and a little over 2" rear. 08 Single cab 4x4

 

You just installed shocks in the rear? Or leafs too?

 

Sorry, leafs too.

 

i installed 2016 OR Bilsteins on my 2014 pre-runner. It gave it a 1" lift

 

@trdude10

So let’s say I lifted my rear 1.5”. Could I just use some 3rd gen rear shocks to accommodate the lift?

 

Ah?

 

Did you put the leaf springs from the 2016 on your truck?

 

The shocks were the same length

The shocks were the same length but the valving was way different. For that reason I would say no. My brothers leaf springs had about 90k on them so they were sagging pretty bad, and I think they hadn't been replaced by the recall yet. Go with a longer shock for sure.

 

Yes

 

You can get away with stock length shocks with only 1.5" lift in the rear. I've been using a 2" aal with 5100s, which I think are close to stock length, for 15000 miles with no problems.