Which cell phone holder are you using?

Here is my setup. Hondo garage FTW

 

PRO CLIP:
These are expensive, (about $60) but are made to fit the exact car/truck that you own, I have one in my Tacoma, and one in my Honda Accord, perfect fit!

 

Which magnet mound did you use for this? I like the setup.

 

Which magnet mount is that? Link? I like the setup.

 

+1 for this. I like it because I can rest my hand on my knee and make inputs to the phone. Also, enjoyed the cost savings over the Hondo. I also don't do the serious off-roading that would vibrate the phone a lot.

 

It’s not as nice and stable as the Un-Holey Dash Mount off-road, but as far as low cost plastic holders go, I use this one with my large iPhone 6s plus, or even my iPad Air for displaying my TopoMaps program.

It’s light and holds securely on regular roads, and also on bumpy off-roads too (its steady on road, although it shakes while moving on bumps or washboard. I like to stop when consulting my off-road topomaps anyways, so it works for me). Only drawbacks for me are that it rattles when empty, and it takes up a cup holder, but that’s ok as my kid uses it when I’m not using it for movies in the back seat:

iKross Cup Mount Holder 2-in-1 Tablet and Smartphone Adjustable Swing Cradle with Extended Cup Car Mount Holder Kit for Apple iPad iPhone Samsung Asus Tablet Smartphone - Black

https://www.amazon.com/gp/aw/d/B00F0IQTE8?psc=1&ref=yo_pop_mb_pd

 

I'm looking too. Any mounts that do not use magnets or a suction cup. I need one that will not damage the dash or leave a mark.
Thanks

 

Yup! One in each car. Both on the glass by the A pillar, below the hood line line of sight.

 

Hondo

 

the wireless charging pad... (off obviously cause its useless)

 

Mob Armor phone holder, RAM arm, Hondo Garage unholey mount, Aukey dual usb charger, 90 degree 3.3ft USB, Hondo phone cord clips.
super strong, out of the way, wire tucked away

 

I use the proclip for my iPhone 7+. Wife got it for me for christmas. Very sturdy, not a fan of how close it mounts to the entune volume knob though. I am old school and still like to turn a knob for volume. And the radio buttons on the left are covered up with it mounted. Thinking about moving the holder to the passenger side of the radio. maybe.

 

My pad worked like crap with my Note4 w/ wireless adapter. My new Note8 with built in fast wireless actually works well with the charger. Really does not disconnect like my old phone did.

 

+1 on the Hondo Garage un-Holey mount and Perfect Squeeze.
They are expensive, but the mount is bombproof and doesn't require suctions cups, glue, tape, drilling, etc. or otherwise altering the truck.
http://www.hondogarage.com/index.php/catalog/devicemounts
I travel May-Oct with my truck camper and navigate using my iPhone SE and Google maps, often on small rural roads and rough FS-BLM roads. This set-up doesn't block the vent, dash or windshield, allows easy adjustment of the screen height and angle to accommodate different drivers and changing sun angles and light conditions throughout the day, and doesn't budge once adjusted, while allowing quick and easy removal of the phone from the mount when leaving the truck.
And they are manufactured in Bozeman MT by a small shop. I stopped by their shop last summer and the owner is a great guy.

 

+2 Hondo

 

I just put one of these on my steering column and lean my phone against the speedo.

https://www.ebay.com/itm/1-to-4-CAR...hash=item36211e057b:m:mOoX7Dy8uRITBwnBshXf7kA

 

ProClip USA here as well. Mine doesn't interfere with any of my knobs or buttons but I forced it further left of the HU than some. Very very solid, doesn't vibrate or move and puts the phone at a good location to ensure you're eyes are never turned away or down from the road.

 

And it doesn’t interfere with the wiper stalk?

 

That's what I'm rocking except with an X-Grip. Love it so far.

 

I updated the setup I posted earlier, to use the Hondo Garage UnHoley Mount but still with the Topeak Ride Case.

$35 Topeak Ride Case with Mount for iPhone 6, Black

https://www.amazon.com/Topeak-Ride-...id=1515179327&sr=8-1&keywords=topeak+ridecase One extra hole and a little counterbore to flush-mount a nut (I could have tapped the hole) and all was set.

However unlike most of you, I am using the Hondo Garage Mount on the vent to the left of the steering wheel, nicely tucked out of the way.