Baja Design fog kit install help

So, once you’ve installed this backwards, is there a trick to getting it apart? Pulling really hard isn’t working.

 

buy a new one, not meant to come apart

 

Having done that it can be difficult but it's possible.

The "barbs" on the Deutsch connector need to be compressed in order to pull it apart.

 

It's a huge pain but you can do it. I had to use a tiny pick to press in the barbs and then kinda wiggle it apart

 

Well, crap. I’ll put the stock ones back in.

Update. Tiny pick worked. Round two tomorrow.