anyone have rough country 3IN TOYOTA SUSPENSION LIFT KIT

have tried to search but found nothing on this lift

http://www.roughcountry.com/toyota-suspension-lift-kit-745c.html

anyone use this kit? i have 2" leveling kit (coil spacer) and then 1" block spacer and threw on 34s have a lil rubbing, i want to goto 3" spacer in front and 2" block in back to give me that lil extra room for clearance

anyone have any pics of this lift on their truck? not just any 3" lift but this one from rough country

 

I think your tires are filling the wheel wells up perfectly. I would trim some plastic and cab steel before adding more lift. More height may not do what you are wanting anyway.

 

on 3/4 turn it rubs a little on rear of front tires on the cab mount, the littlest bit. im hoping 1" of lift with help clear it before i go cutting anything

 

here is front front bumber side. hardly every rubs unless turning and hitting a bump





and this is the rear where it rubs on the cab mount



I just need that extra 1" of clearance

 

Even if you get 1" of extra clearance, it'll rub in the same place when the suspension/tire articulates up 1". Best way to clear bigger tires is to trim.

 

Just get to trimming

 

I've learned from this forum

 

More lift won’t fix this. Careful cuts and grinding and a fresh welded piece of reinforcement will look as good as factory.

 

whats a shop normally charge for CMC? not something i could do my self

 

I bought my plates from Bay Area metal fab for $20 and paid a shop $100 to do it. Worth every penny for me.