Maxtrac Spindle Lift for 2nd Gen Prerunners

I've just accepted it and am going with 887s when I get the money saved up

 

i have a set that came off my truck with only about 1k miles on em

 

What UCAs you going with?

​

 

I'll pm you

Haven't decided between the jba' s or spc's. Leaning more towards jba's

 

Could always go with an aluminum bumper, or a hybrid if you are concerned about weight up front

 

It's a hybrid steel. Has fill plates on the wings with cube cutouts

 

Damn ok who’s running 884s with their maxtracs and billies set at 0? Might go that route. Thanks @ChadsPride

 

For those with the 4 inch spindles and Dakar’s,

How level do you sit? Any rake?

Also, do maxtracs require the use of a driver side spacer to level out driver side lean?

 

When I had just the spindles and Dakars I had about 1" rake front to back (nose down)

You wont need the drivers side .25" spacer for the taco lean unless you swap from your factory coils

 

Thanks for the reply, I will end up swapping the coils to handle heavier loads. But first step is the spindles and Dakar’s.

 

This was with just the spindles and Dakars

Will try and find more pics​

 

I have decided to go this route, I love the stance of your truck it looks great! If I was on more of a budget right now and don't go with the Dakars, how else can I get that exact stance? I don't haul anything so I don't need anything heavy duty, but blocks aren't the best I know. Also, I like a little bit of rake, or at least level! I see alot of trucks with the nose high and I in no way want it to turn out that way.

Also, with this 4" lift I would need new tires. I like the pizza cutter 255/80/17 look, I wonder how that would look with this lift?

 

Sup!
​

Many many options to lift the rear and get the height you want.

Could do a progressive 3 leaf AAL and a small axle shim.

Could do a single AAL and small block

Could just use the block that comes with the Maxtrac kit for super mega budget lift

So many variations at different price points. Just have to figure out what fits your budget the best.

I'd honestly say spindles and Dakars are the best bang for the buck

 

Would a wheel such as this:
https://www.discounttiredirect.com/buy-wheels/level-8-tracker/p/64910
Be able to clear 4 inch spindles?

 

I believe those have a backspace of 4.51 so you should be good. With 17 s you can't go higher than a 4.75 backspace.

 

Painted my Maxtrac's yesterday! Install is set for this Saturday, just waiting on the second set of leafs and the one inch blocks (which should be arriving today). I'm like a kid waiting on an impending beach trip with some bros. Only reason this Monday doesn't suck so bad

 

​

 

I don't believe it till I see it lol.

 

Haha I'll send a pic of everything when I get home from work! I decided to paint the Maxtrac's white and coat the Maxtrac symbol at the top black. I think it will look pretty cool for the few days it stays clean on the truck lol.

 

Sweet!!! ​