Bought these lights on TW need help!

Hey, I bought these lights from a guy on this forum for 120, thought I got a good deal! Not so much, I want to use them with CBI ditch brackets. In the picture is everything he sent me, said that they were complete and would work for my application. I am not an idiot but there is not way in hell that I can see to install these. I bought a harnest and additional dually mounting brackets (40184) from Amazon, they don't line up with the bolt holes on the side of the cube. Every single light I have seen has the bolt hole on the lower half of the light. This one is in the middle.
I am pissed and feel like I got screwed by a well known member.
Does anyone recognize this light?
Thanks in advance, I have pm'd this guy and text him tonight with no response. I don't want to bus roll him or complain, I just want put them on my truck.
I will be leary making any purchases here in the future.
Thanks

 

those should match, bracket goes on the bottom of the light

the hex/allen bolt goes on the side


google ditch lights and look at how those lights are set up as its a little hard to describe

or if there is not cut into the light were a bracket would go on the bottom then yeah those brackets dont match

Heres an example of what I am talking about.

 

I did and he said he sent me everything, I pressed him on them and he got pussy with me. It's not really the money, so I ordered the additional brackets and wiring for 50 and they still cannot be mounted. Do you know what the name is for this model? They are not current models available on rigid website or Amazon that I can see.

 

They look like Duallys but I cant tell from the side, also I edited my post not sure if you saw it

 

Here's the front and the extra bracket I ordered

 

Can you take a picture of the bottom where the wire is coming out?

 

Not an expert on pods but I've never seen a Rigid pod with the Allen screw in the middle of the body like that. Normally they are in the lower section of the body like this.

 

Looks almost like an Auxbeam with a Rigid cover...

 

I'd simply contact Rigid directly.

 

Rigids also don't have this triangle in the rear. Do yours?

 

Bingo. That does not appear to be a Rigid pod. Rigids mount at the bottom as mentioned. It looks like the face was swapped.

 

Yup...my Midnight Edition pods.

 

Agree w/others. It appears shenanigans have occurred.

If you decide to proceed installing these lights (as opposed to seeking a refund) you might contact the folks here and see if the U bracket you need to mount the light is sold separately.

https://www.auxbeam.com/70025604

 

Well that's very unfortunate and I hope you figure out things are what they should be and work out.I will say tho if they are as they appear from the info you have received from these knowledgeable members above.Bc I am in no way familiar wit the subject at hand here, you need to put that members name that you did the deal with on here to beware the rest of us from getting burned of that's what has happened here!Best of luck figuring things out.

 

The lights that OP has look just like my Auxbeams from Amazon.

 

They also look like Cali Raised pods with a different front plate.
https://cdn.shopify.com/s/files/1/1533/3811/products/2x2_20w_Pod_1024x1024.jpg?v=1492472979

 

Yeah could be my aux beams have 6 leds and OPs only have 4 like the cali raised. Nice observation.

 

@Fiatdave, have a link to the original listing?