carrier bearing drop ?

What's up guys! So I have a 2.5 front lift on my 2012 tacoma and 2.0 rear. Truck is amazing and love it, only problem are these vibrations at 20mph to 25mph. Just found I need to drop my carrier bearing and I've wondered, "How much should I drop my carrier bearing?"

I also can't find bolts that have similar threads and longer bolts similar to my tacoma. I really don't want to go around messing up my threads on the manufacture set up.

What products worked for you? I keep seeing Old Man EMU but the washer brick looks small and even if I use it what size can the bolt be? anyone used Old Man EMU on their Tacoma?

 

Put this in and be done with it as long as that is where the vibe is coming from.

https://www.headstrongoffroad.com/store/p126/Old_Man_Emu_Carrier_Bearing_Drop_Kit_-_FK29.html

 

All about the angles, it is.

 

OME kit that Rick linked above is what I used from the first install. No vibration issues ever

 

There he is!

 

Or, you may need axle shims...
https://www.tacomaworld.com/threads/toytec-3-degree-rear-axle-shims.201164/

 

Installed OME drop kit on 2017 DCLB, 2” front/ 1” rear and took care of my vibes. Also previously did the ECGS bushing. Vibes were very subtle to begin with, only would occur when slowing down to a stop.

 

When do you know if you need tho shim the leaf pack