1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

07 bilstein 5100 lift

Discussion in '2nd Gen. Tacomas (2005-2015)' started by 1E7DCSB, Jan 22, 2018.

  1. Jan 22, 2018 at 2:57 PM
    #1
    1E7DCSB

    1E7DCSB [OP] Well-Known Member

    Joined:
    Jan 22, 2018
    Member:
    #242056
    Messages:
    308
    Gender:
    Male
    NH
    Hello,

    New to tacomas and the forums.

    I have a 2007 trd off road double cab that I'm installing a toytec 3" lift (bilstein 5100 set up on 2nd clip) and add a leaf in the rear.
    (Ordered a block kit to level it out in the rear as well)

    I'll also be running 285 70 17 bfg KM2s on 17" trd pro wheels off of a 4Runner.

    My question is, will I have to trim anything on the frame that the tires could rub on at full lock or will it be okay with wheel spacers?

    Thanks in advance
     
  2. Jan 22, 2018 at 3:57 PM
    #2
    desertrunner24

    desertrunner24 Well-Known Member

    Joined:
    Oct 30, 2016
    Member:
    #201101
    Messages:
    3,954
    Gender:
    Male
    First Name:
    Jake
    Fresno , CA
    Vehicle:
    2011 TRD offroad 4x4
    Some
    You might rub the cab mount. Depending on the offset and back spacing of your wheels. Stock wheel with spacers I rubbed the cab mount and had to cut a bunch of inner fender to clear 285s. If you replace your stock uca with after market it might help you get the wheel forward more to help minimize
     

Products Discussed in

To Top