2015 TRD Sport 4x4 dcsb (great camper/wheeler)

Great rig that has taken me to some remote places from California to Montana and over to Arizona for the Overland Expo. I had intentions of keeping it forever and modding it along the way but now just looking to downsize and be able to settle into a house. My goal was to make a simple truck to get me camping a little further out than the normal weekenders.

Base model: 2015 Tacoma trd sport dcsb 4x4 w/ Entune package including navigation
6 speed manual
Miles: 72,xxx
Factory tow package
285/70r17 Pro-Comp AT (new early 2017)

Price: $29,500
Location: San Diego, CA

Suspension:
Front Fox 2.5" coil overs (non res)
King 700# coils
Re-valved by DownSouthMotorSports for application
All-Pro upper control arms
Rear Fox 2.0 (non res)
OME Dakar leaf springs w/ extra overload spring to handle more weight.

Armor:
Pelfreybilt front bumper - full hooped
Pelfreybilt IFS skid
Pelfreybilt rock sliders with kick out
BAMF lower control arm skids (not installed but included)

Recovery:
Superwinch 8000# winch
Spooled with 100ft synthetic line
Hidden winch front license plate bracket

Extras:
-SnugTop camper shell - reinforced by the factory, rated to 500lb loads, carpeted
-Prinsu Design topper rack (RTT not included in pic)
-All-Pro Hi-lift mount in bed
-Home built drawer included - it was suppose to be a prototype then re-done with higher quality wood but never got around to it. It is currently not mounted in anyway to the bed, just laying there held to the side via tie down points to bed.
-RAM mount set up on dash to hold iPad mini or iPhone (phone cradle not included, ill be using it)
-Firestick CB antenna w/ Midland handheld

Issues:
- Rear bumper has two identical dents. I was backing up a jets trailer in a rush and jackknifed the front box into the rear bumper. Never minded it thinking I'd eventually get a rear plated bumper. But its there...
- Camper shell has scratches on the top from cargo jumping out of some straps.
- Home drawer - its a DIY project using great tool box drawer sliders rated for heavy tools, BUT the wood is currently plywood.

Not included in price (negotiable?):
- ARB roof top tent.
- ARB middle size awning

Feel free to ask/PM any questions. I can take any specific photos you'd like but I don't really have that artsy eye for cool photos like some of you

 

DIBS on the rack and shell if you decide to part out.


Good Luck With The Sale!

 

bumpfest

 

Bump. How’s the ride with those 700lb springs?

 

Making the change to 700# springs was one of the smartest things I did. But its probably the re-valving that made the most ride difference. It takes a few days for a turn around, so have an extra vehicle ready!

 

thanks for the info! Bump

 

interested in truck. new to TW. can you pm me would like to contact you!

 

If this is still available could you post interior pics?
Thanks!

 

Bump

 

still interested in the shell and rack.

 

you have any more photos? Ive been looking at getting back into a Tacoma from my FJ. Im just up the road in Oceanside.

 

Would you trade me your bumper. I have the same color

 

still for sale? I'm in LA