need help wiring aftermarket ignition switch!

maybe i should post in a runner page as well, i just used to have a taco so i have an acc here. figured were all a big toyota family. So just got a 93 4runner with a 3.4 swap out of a 98 tacoma was told most of the stuff under the dash was from the taco. it has a push start button, but you have to have the ignition turned on for it to start. So my key lock cylinder is going out ( key only likes to turn sometimes) I just bought a switch panel with a key switch and a push button. Im wondering which wires from the ignition harness go to what side of the red key switch? ive hears of having to use 2 red key switches but have also heard there is a way to use 1? any help would be greatly appreciated!
ignition has 6 wires coming out
1 black wire thats cut
1 black w/ a white stripe
1 blue w/ a red stripe
1 solid white
1 white w/ a red strioe
1 black w/ a red stripe