Subway4X3 Shameless Copycat Build

Ah....don’t have that problem here lol

Hits my garage door every day and doesn’t budge

 

I wouldn’t say every few feet, but it can definitely happen. Jerry wheels with a 5’ whip mag mount and hasn’t had it knocked off yet, and whacks it’s bunch.

 

I have a 102" whip it's so noisey and excessive. Haha that's one of the reasons I use it. But it's not a mag mount. I used to have a mag mount on the roof before I got the cap I would pull it off and set it in my bad on the bed rail. That seemed to help. But it's still fall over and stuff.

 

Yeah I run a 4’ whip on my roof, NMO mount and it can be noisy up there when I whack it into stuff. Works great as an antenna though!

 

I had a mag mount way back in the day. welded up a little platform that mounted to the tie down point. Granted it was a scrawny antenna.


Pictures like this make me regret starting to wheel lol so clean

 

Need some high quality pictures of your new cap!

 

I'll just put this here.

 

hey! pics with cap? or did I miss it in the prior pages?!

 

you didnt miss it, lloyd is just slacking

 

go look at NE craigslist finds

 

New for me color matched cap:

Installed 1/6/17


On the trail and baptized with fresh pinstripes on 1/7/17

 

Ok so I just looked through your entire build thread for one mod you have done. I am short and am curious about the 1.5" raised seat mod you did. How did you do it? Do you have any pictures? Driving around town I am perfectly fine but I have found off roading that it would be advantageous to have better sight lines by being a little higher up. Thanks

 

Checkout these threads:

Raise the low slumping seat.

Seat Lift Spacers

 

Thanks. Did you raise just the back of the seeat or the whole thing?

 

I raised both front seats. The rear 1.5' and the front 1"

 

I have some UHMWPE sticks in the mail coming so I will attempt to make a lift for it! Thanks man

 

I think I'm gonna do this in the spring.

 

Rear seat organization:

 

Topside organization:

 

B.A.MF. Rear Diff Skid:



Installed Dec 2017. (pics pending)