Temperature & direction display

Has anyone had this issue with the temp & direction display? Checked ambient sensor, solder joints on resisters in display are all good. Thx

 

I believe the was a TSB or some other thing Toyota put about this as this was a big problem.

 

Sorry what was a TSB. Thx

 

Technical Service Bulletin

 

Ok. Any idea if the problem was in the actual display board or wiring issue to the sensor? Debating on purchasing a new display but not cheap. Thanks for your reply Rick.

 

https://www.tacomaworld.com/threads/overhead-compass-temp-fix.18497/

 

This is not the issue. My display has power to it. Just no temp reading. Resistors have been checked and all in place. Did continuity to double check. Thx anyway

 

Sorry I had a 2005 years ago and dumped it before any issues started. My 2010 didn't have it, and my 15 doesn't. Sorry I wasn't more help

 

No problem. Thx anyway

 

Maybe look through all this.

https://www.google.com/search?q=200...ome..69i57.14277j0j8&sourceid=chrome&ie=UTF-8

 

My display did same thing, all looked good as well. Everything checked good until I flexed the circuit board like it would over rough road. Resoldered both resistors and works great now.

 

You flexed the board as in bent it?

 

I wouldn't flex the board, but my res. looked good too and no display, I resoldered the 2 res. and it worked.