1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

"SoundoffAudio" Custom ported box on its way home!

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Whiteghost184, Jan 12, 2018.

  1. Jan 12, 2018 at 8:54 AM
    #1
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    I have been searching the web for a behind the seat solution for over a year. Picked up my Tacoma in mid 16 and noticed the previous owner had installed a Pioneer dual din with aftermarket highs and mids run off of an Alpine amp. He had also use a dynamat type product on the roof and rear wall of the double cab. There were also RCA cables run to the rear but no amp or box was present.
    The stealership must have removed it prior to putting it on the lot or they walked away at the auction.
    So almost 2 years now with nothing but mids and highs. Research lead me to review Taco Tunes, Mr Marv, JL, under seat sub plates, and a number of online enclousers/prefab providers. Then I found Sound Off Audio. His website mentioned you could ask for custom alteration to any of his configuraion. So I figured I'd call.
    I had settled in on Sundown Audio. They make an awesome sub at a great price. Currently running an SA10D2 in my home theater and a E8v5 in our 2015 Sequoia (had to mod the factory sub enclosure, but works well powered off the factor JBL Amp). So for the Tacoma I selected (3) E8v5. For power, I went out to my shed and had to dust off my MMATS D200HC. Added a second Battery, (2) 150 amp bussman breakers, a 250 amp buss bar from eBay, the big three upgrade, and 2awg ultraflex throughout the truck.
    Matt's (owner of SoundoffAudio.com) enclosure was customused for my needs to fit (3) E8v5D2's in a net space (after port and sub displacement) of 1.43 @ 32.55hz (1.34 ohms to the MMats= +/-1250 watts or +400 to each woofer).
    But, I am thinking of temporarily sealing one 8 and just running (2) E8v5D2's. Changing the enclosure to 1.53 net @ 31.23hz. I would then wire to 2ohm and feed each woofer with +450. And they would each sit in .765sqft vs the three subs in .47sqft each (Sundown's recommendations are 0.5-0.75 ft^3)
    Curious to see/hear the difference! Sorry for the long read. The enclosure shipped yesterday and arrives Monday. Prep will probably take a week (mod a few things, sealing the interior, and installing the t-nuts woofer and sub plate. Hope to have pictures soon.
     
    This site contains affiliate links for which the site may be compensated.
    #1
  2. Jan 13, 2018 at 6:23 PM
    #2
    Lou Frasier

    Lou Frasier Active Member

    Joined:
    Jan 13, 2018
    Member:
    #241143
    Messages:
    35
    Gender:
    Male
    First Name:
    Lou
    Vehicle:
    2008 toyota tacoma 4 door pre runner
    aftermarket stereo system
    very nice setup, sundown makes an awesome product and the mmats,well.awesome amp,
     
  3. Jan 16, 2018 at 5:10 AM
    #3
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    Thank you Lou! Subs and box mounted, couldn't be happier! Hits low..... and these eight's are begging for more power. Could not resist mounted the three and they like to eat. The Mmats is wide open and they take it like a champ!
     
  4. Jan 16, 2018 at 5:13 AM
    #4
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
  5. Jan 16, 2018 at 5:14 AM
    #5
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
  6. Jan 16, 2018 at 5:15 AM
    #6
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
  7. Jan 16, 2018 at 6:17 PM
    #7
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    Spent some time at lunch in the truck fine tuning a few things. This song I found was altered to shake the dash out of you truck. It hits so low... I may be bias, as I grew up to Metallica. But still an awesome song!

    https://m.youtube.com/watch?v=isMN8O71ohc
     
    gearcruncher likes this.
  8. Jan 27, 2018 at 2:54 AM
    #8
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    The power bug bit hard...... the itch would not subside. Until last night. Say hello to my little friend!

    20180126_162640.jpg
     
  9. Jan 27, 2018 at 2:57 AM
    #9
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    And her "Birth Sheet", Certified Dyno Run @ 1 Ohm @ 12.6v to >1%thd!!!!

    20180126_162451.jpg
     
    Matt3400 likes this.
  10. Jan 27, 2018 at 3:01 AM
    #10
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    2988watt RMS for $339 shipped to the house (Amazon)!!!! And it is beating on those E8's. Also this amp fits perfectly under the passenger seat. No issues!
     
  11. Feb 5, 2018 at 4:45 PM
    #11
    Marine 8541

    Marine 8541 Well-Known Member

    Joined:
    Feb 22, 2015
    Member:
    #149286
    Messages:
    92
    Gender:
    Male
    First Name:
    Jimmy
    Iowa
    Vehicle:
    Tacoma SR5 4x4
    Stock
    Have a some video of the subs in action?
     
  12. Feb 6, 2018 at 10:21 AM
    #12
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    I'll have to take the upper half of the seat off... But I have been following your thread and am extremely intereted in the seat mod you kinda explained. Need to do the same Mod and it would give me the excuse to remove the top half for a video!
     
  13. Feb 6, 2018 at 10:21 AM
    #13
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    Mind sharing a bit more?
     
  14. Feb 6, 2018 at 10:22 AM
    #14
    Whiteghost184

    Whiteghost184 [OP] Well-Known Member

    Joined:
    Jun 2, 2017
    Member:
    #220539
    Messages:
    65
    Gender:
    Male
    Florida
    Vehicle:
    2007 URD 4x4 DC LB
    2007 SR5 DBLB 4x4 G2 456 gears front and rear 6" Procomp stage 1 XD 20×10 Toyo 35x12.50x20 E-Load Pioneer head unit Alpine amp running all the door speakers Backflip bed cover Fender Flares URD Stage 1 and 2 Aftermarket seat covers Built Transmission including After market valve body IPT Torque Converter Trans Cooler and EPC Solenoid Full 2.5" URD exhaust and Headers (part of the stage 2 kit) 30" light bar mounted in front bumper Next: M1102 Camp Trailer Conversion
    That mod should be a Sticky!
     

Products Discussed in

To Top