SOLD

I have a BNIB, never mounted set of Bora 3/4" spacers. Had originally bought to put on my 09 taco, but since its totaled I'm taking another route. Price is 140$ OBO, shipped Con-US.

 

Do you know if the lug nuts need to be trimmed with these?

 

Bump

 

Is it a set for front and rear?

 

Yes, front and rear (4 total)

 

Any desire to separate? I'd be interested in 2 if someone else is interested in 2.

 

Boom I’ll take them as long as they’re the hubcentric model. Looks like they are. PM sent

 

bump

 

These still for sale ?

 

Would be down to split if OP is willing. Also just looking for one set

 

Would also be interested in splitting. I just need two.

 

I'm no longer interested, so if you two would like to share the set, go for it!

 

Depends on your wheels. If they have some pockets between the holes, then you are fine, if not, the stock lugs do poke through a bit. So, wheel pockets or trimming is required.

 

What do you mean pockets between the holes ? I am intrested in purchasing all of them

 

If your look at the mount surface of your wheels, the surface that actually contacts the truck's drum/disk surface, you will see either; a totally flat surface; or, a surface where the spaces between the lugs holes are dug out, or have depressions, between them. If your wheels have the depressions, the stock lugs will fit into them with the spacer on, if the surface is flat, the stock lugs will hit the wheel mount surface and not allow them to get flat to the drum/disk and will need to be trimmed.

See the wheel mount surface in the pic below. The pockets between the lug holes are what you need to make the 3/4 spacers work out of the box.

 

Sale pending

 

SOLD