Pro fogs Mod

This seems like a job for @mesojdm but anyone attempts to free up the slot above on the bezel for another fog or DRL? Seems like it’s made for it but budget got in the way. WRX has the right idea tho.

 

@mesojdm another spot for you to put a light

 

Sub’d For the GB

 

He has a plate front bumper, no?

 

Looks like a job for a dremel...

Can’t be that hard to mount a second rigid there.

 

Dremel and a little sanding. Then spray it black again. You’d think someone already done it.
Im thinking I’m going to buy a cheap damage bezel off eBay and see if I can hack it before cut into the good one.

 

You’d think so. Price for rigids sucks though. ~$269 for a set of sr-m in the DOT lense.

 

I read that the top is vacant due to DOT regs on fog light mounting height and the 1" lift in the front that the Pro has, required a lower fog solution.

 

Sub’d for write up

 

Another fog might be redundant but a yellow running light. That would be awesome.

 

my thoughts as well. and the Rigid fogs are so blue that i bought some yellow LaminX for them. never installed tho. not sure they're bright enough.

 

That’s why they made these. Not sure if the SR M is our type but it looks identical

 

how much light did you lose?

 

I can’t tell any significant, it just yellow now

 

Wish Rigid made a dual top/bottom light that’s plug and play and compatible with the outer Pro bezel so we can have two on each side. Looks way cooler plus more horse power...haha!

 

Yellow SRM covers.

 

So The Pro fogs are the SRM with different defuser. Good to know

 

Look like these:

https://www.rigidindustries.com/led-lighting/902533

On a side note the 69amp draw has to be a typo. If they draw 13w at ~12v that’s about 1a per or 2 total.